so i gots a problem... have an 86 rx7 n/a 5speed. and when ever i depress the clutch pedal it stays at the floor... i got out and checked the arm and there is a lot of play between the slave and the release fork itself..

now my question is is there a way to replace the fork or take it out and re-install it with out taking out the tranny?

also my shifter needs new bushings.. any recommendation on were to get them.

 

i have almost the same problem!
mines a 1991 RX 7 N/A and the pedal droped and feels like it wont engage! as i talk now i came home from a 20min walk from where my car is sitting cuz it wont take any gears!
i put my foot down and it wont come up, need to pull it up!

-sorry for the spelling

 

Same problem on both cars. Your clutch hydraulics are shot. You need to replace the master and slave clutch cylinders. East to do and you can get the parts at your local auto parts store.

For the shifter bushings, try mazdatrix or Ray Crowe at Malloy Mazda.

 

Yep,
ty hanman that was it for me it was the master cylinder. cost me 35$ but got it fix fast.
ty again!

 

+1 for Mazdatrix
http://mazdatrix.com/g4.htm