Cheap Shell, New to Rotary
#1
Can Post Only in New Member Section
Thread Starter
Join Date: Mar 2010
Location: westminster
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Cheap Shell, New to Rotary
hey guys, i just got a 1991 rx7 rolling shell for 600. It does not have a tranny/engine/harness. Im a bit clueless on what parts i specifically need to get this shell running. If some of you could help with a list of things would help a ton.
#2
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
Well, it sounds like you need a transmission, engine and harness.
How are we to know what is missing from your car?
Head over to the FAQ and download a copy of the FSM. And then to your local auto parts store and get a copy of the Haynes manual. Using those two manuals (the Haynes is a great quick reference and useful for 99% of questions) you should be able to figure out what is missing.
How are we to know what is missing from your car?
Head over to the FAQ and download a copy of the FSM. And then to your local auto parts store and get a copy of the Haynes manual. Using those two manuals (the Haynes is a great quick reference and useful for 99% of questions) you should be able to figure out what is missing.
#4
is the rear end and all different from a na to turbo? thought it was the engine harness and transmission driveshaft that were differnt besides the tire options and what not?
#6
4 sure just the pumps and what not will run pretty high even used. i would buy a parts car and buy whats wrong with the parts car for ur car in your situation i would just be mad it may take some time to get it a working shell lots of work time and money. good luck keep us posted on your progress!
Thread
Thread Starter
Forum
Replies
Last Post