New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

Cannot pull the choke

Thread Tools
 
Search this Thread
 
Old 01-03-18, 10:52 PM
  #1  
Full Member
Thread Starter
iTrader: (1)
 
toddk042's Avatar
 
Join Date: Oct 2017
Location: St louis, MO
Posts: 135
Received 6 Likes on 5 Posts
Cannot pull the choke

I just picked up a 1979, and I cannot pull the choke. The car has been sitting for a couple of years without being started. I did notice that the green solenoid has been removed, and it has something to do with the choke. (Only the white and blue solenoids are left)
Any thoughts?

Todd
Old 01-04-18, 03:34 AM
  #2  
Urban Combat Vet

iTrader: (16)
 
Sgtblue's Avatar
 
Join Date: Oct 2003
Location: Mid-west
Posts: 12,011
Received 862 Likes on 611 Posts
Yes. The cable may be frozen and you need to download a copy of the Factory Service Manual from the FAQ sticky at the top of this section.
The following users liked this post:
toddk042 (01-05-18)
Old 01-04-18, 11:10 AM
  #3  
Out In the Barn


iTrader: (9)
 
KansasCityREPU's Avatar
 
Join Date: Mar 2005
Location: KC
Posts: 6,041
Received 1,012 Likes on 798 Posts
The choke it operated via the sensor in the back of the water pump. It engaged a magnet in the choke. Once the car is at temp, the sensor value toggles and releases the choke.

If you can't pull the choke out at all, then it's a frozen cable most likely. If you can pull the choke out but it pop back in, the sensor is either not hooked up or bad.
The following users liked this post:
toddk042 (01-05-18)
Old 01-05-18, 12:52 PM
  #4  
Full Member
Thread Starter
iTrader: (1)
 
toddk042's Avatar
 
Join Date: Oct 2017
Location: St louis, MO
Posts: 135
Received 6 Likes on 5 Posts
I'm trying not to be daft, but when you say frozen, do you mean ice frozen, or seized up?
Old 01-05-18, 01:38 PM
  #5  
rotorhole
 
insightful's Avatar
 
Join Date: May 2017
Location: retired rotorist
Posts: 680
Received 70 Likes on 66 Posts
corroded, not iced.
The following users liked this post:
toddk042 (01-05-18)
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
msmcgill
1st Generation Specific (1979-1985)
0
05-10-15 08:32 PM
GILMORE
New Member RX-7 Technical
5
04-11-10 10:22 AM
hugo20
2nd Generation Specific (1986-1992)
10
09-24-04 12:25 PM
MACH7
1st Generation Specific (1979-1985)
1
07-15-02 08:41 PM



Quick Reply: Cannot pull the choke



All times are GMT -5. The time now is 11:41 PM.