Bov question
Thread Starter
Junior Member
Joined: Jun 2013
Posts: 2
Likes: 0
From: Minnesota
Bov question
I have a question about blow off valves.
I currently have a stock TII 88 Fc stock intake, recently I added a Forge blow off valve. I installed it, but when I ran the car the engine was running rich and if the turbo was used at all, after stopping acceleration, the car would die. I assumed vacuum leak. So I opens the Forge Bov and the secondary spring was busted. I ordered a replacement part. My question is, will the Bov work without problems even though I have no air going from it to the MAF. Or is something like a diverter valve needed. Thanks for the help.
I currently have a stock TII 88 Fc stock intake, recently I added a Forge blow off valve. I installed it, but when I ran the car the engine was running rich and if the turbo was used at all, after stopping acceleration, the car would die. I assumed vacuum leak. So I opens the Forge Bov and the secondary spring was busted. I ordered a replacement part. My question is, will the Bov work without problems even though I have no air going from it to the MAF. Or is something like a diverter valve needed. Thanks for the help.
Thread
Thread Starter
Forum
Replies
Last Post
Adaptronic S5 Turbo PNP Unit questions
_Tones_
Adaptronic Engine Mgmt - AUS
10
May 25, 2021 05:37 AM
Nosferatu
2nd Generation Specific (1986-1992)
7
Sep 5, 2015 02:13 PM