Which boost pressure and which RPM accept my RX7 FD3 ?

I have single turbo type T04 /I think/
HKS fuel and ignition controller
HKS boost controller

Now will be engine rebuilt and I want do on engine street porting and I want new injectors.

Before I have 360 HP with serial injectors and serial port at boost pressure was 1,1-1,2 bar and max RPM was 7700.

Sorry my english I want to learn.

Thank you.

 

I'm not sure what you are asking? What boost pressure for what? What are you trying to do?

 

I think turbo boost pressure can accept my engine, if I don,t want damage my engine. I use standart 98 - 100 octan fuel.

 

Your max boost will be determined by the fueling you can provide. I would find a trusted rotary tuner in your area and speak with them. I would stick with stock redline for your max rpm. Unless you have swapped out your intake manifold setup and had the needed work done on the inside of the engine, there will only be increased risk of engine failure if you exceed the redline without a gain in power.

 

Agree^

No worries. Your English is better than my Czech.
I sent you a Private Message (PM)