New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

Bad ECU

Thread Tools
 
Search this Thread
 
Old 05-26-09, 03:51 PM
  #1  
Junior Member
Thread Starter
 
Raleighrx7's Avatar
 
Join Date: May 2009
Location: Midvale Ut
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
Bad ECU

I have a 1987 S4 TII, It has no spark, the Injectors are not firing, I tried a new crank position sensor, and still nothing. I am pretty sure the ECU is shot. It was running very well, but when I got it into the upper RPM range, it acted like it hit a fuel cut-out, then it died, and hasn't started since. Any other ideas?
Old 05-27-09, 09:30 AM
  #2  
Engine, Not Motor

iTrader: (1)
 
Aaron Cake's Avatar
 
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes on 91 Posts
Check the basics first. Test for 12V at the black/yellow wire at the leading or trailing coil when the ignition is on. If you don't get 12V there, then the ECU/coils won't have power. Check the EGI fuse in that case. And the main relay.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
SCinfidel
3rd Generation Specific (1993-2002)
4
09-08-15 05:36 PM
befarrer
Microtech
3
08-22-15 05:52 PM



Quick Reply: Bad ECU



All times are GMT -5. The time now is 07:47 PM.