BAC tests ok but when connected to the car its a no go.
#1
Can Post Only in New Member Section
Thread Starter
Join Date: Jan 2011
Location: in a box of corn flakes
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
BAC tests ok but when connected to the car its a no go.
Hello to anyone reading this I am new to board posting, but I have been lurking them
for over a year for info and it has been very useful but now Im stuck. My bac valve has
never worked since i got the car because every time i turn the wheel with car warmed up
with A/C on the car goes from around 800rpm to oh! S#!% its going to stall. I have
searched and found that the valve can be tested with 12v already did this tested ok but
plugged on the car its a no go. I then removed the valve cleaned it did everything I
could to it but still a no go. now the thing is i don't want to buy a a good bac and find
out it has the same problem. Is there another thing im missing maybe another
connector that completes the circuit is disconnected or something? is the 12v test a
reliable test?
P.S.
the car is a 86 N/A and i have tested two n326 ecu's both had the same results oh almost
forgot resistance test on bac checked ok too
P.S.S.
hope you can help thanx for reading
for over a year for info and it has been very useful but now Im stuck. My bac valve has
never worked since i got the car because every time i turn the wheel with car warmed up
with A/C on the car goes from around 800rpm to oh! S#!% its going to stall. I have
searched and found that the valve can be tested with 12v already did this tested ok but
plugged on the car its a no go. I then removed the valve cleaned it did everything I
could to it but still a no go. now the thing is i don't want to buy a a good bac and find
out it has the same problem. Is there another thing im missing maybe another
connector that completes the circuit is disconnected or something? is the 12v test a
reliable test?
P.S.
the car is a 86 N/A and i have tested two n326 ecu's both had the same results oh almost
forgot resistance test on bac checked ok too
P.S.S.
hope you can help thanx for reading
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
KAL797
Test Area 51
0
08-11-15 03:47 PM