automatic engine in a manual car
#1
Junior Member
Thread Starter
Join Date: May 2009
Location: lisbon falls maine
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
automatic engine in a manual car
bought a standard fd over the summer it has never run quite right since i bought it come to find out the engine was from an automatic 7 what if any difference is there between engines?
#3
Junior Member
Thread Starter
Join Date: May 2009
Location: lisbon falls maine
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
not boosting correctly hunting idle dies when you shift from neutral to any gear when idling the wiring harness looks toast and my vacuum hoses are hard as rocks and the wastegate hose is split at the nipple i'm going to do a hose job and fix/replace the harness and go from there the turbos themselves look like there ok but i won't really know till i fix the hoses it also has a p.s leak and a few weirdly routed wires/cables needs ball joints rear toe links engine mounts ect ect.... i got my work cut out for me just wondering if there was any parts different on an automatic engine that would need to be changed over
Last edited by rx7inMaine; 12-01-09 at 08:14 AM.
Thread
Thread Starter
Forum
Replies
Last Post
KAL797
Test Area 51
0
08-11-15 03:47 PM