New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

Afr problems

Thread Tools
 
Search this Thread
 
Old Apr 10, 2014 | 06:57 PM
  #1  
fc3rotard's Avatar
Thread Starter
Junior Member
iTrader: (1)
 
Joined: Dec 2011
Posts: 34
Likes: 0
From: Moscow, Pa
Afr problems

I have a 87 rx7 turbo with 45k on the rebuild. it has a medium street port, fmic, 3" turbo back exhaust, full emissions delete, the throttle body mods, 550cc primaries, 680cc secondary's, s5 turbo swap with a turbonetics to4b h-trim compressor. im currently running about 12psi boost.

ok i have an aem wideband afr guage, and lately my afr's have been going nuts. It used to run around 12 at idle, 14-14.5 at normal cruising and would be around 10-10.5 when its in boost. it would never get above 15. But lately its been jumping between 12.5-14 at idle and between 14.5-17 at normal cruising. its still staying good in boost though. I have checked all my vaccum lines and block off plates for leaks, found none. and checked all my intercooler piping and found no leaks. i cleaned my afm out and tightened my bov in case that was leaking. i cant figure it out and dont wanna do any damage. any help would be greatly appreciated.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
R.O.D
2nd Generation Specific (1986-1992)
34
Jan 6, 2016 12:09 AM
stickmantijuana
Microtech
6
Nov 21, 2015 10:20 AM
R.O.D
Rtek Forum
1
Sep 23, 2015 01:15 AM




All times are GMT -5. The time now is 08:43 PM.