New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

91 Rx7 won't turn over

Thread Tools
 
Search this Thread
 
Old 10-23-09, 10:25 PM
  #1  
DarthNacho08
Thread Starter
 
DarthNacho08's Avatar
 
Join Date: Sep 2009
Location: Fontana, California
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
91 Rx7 won't turn over

So i just bought a 1991 rx7 with a rebuilt motor, 3 miles on the rebuild when i picked it up from the mechanic. I took it home and replaced the battery right away because the old one was completely dead. had to push start it when I got gas on the way home. I let it sit for a day before I tried to start it again, and it wouldn't turn over. we managed to push start it again, and it would turn over after that on its own. The next morning you couldn't even hear the starter, something had drained the battery overnight, I recharged it and had to push start it again, but after that, it turned over on its own. I left the battery unplugged after that so it wouldn't get drained again, the next time i tried to start it, it wouldn't turn over. I was by myself, so i didn't attempt to push start it again. Basically, the motor won't turn over if it sits for an extended period of time, and something is draining the battery, but theres no parasitic drain, which i checked for already. I'm willing to try anything right now to get it to run reliably. Any help is appreciated
Old 10-23-09, 11:52 PM
  #2  
Top Down, Boost Up

iTrader: (7)
 
RotaryRocket88's Avatar
 
Join Date: Mar 2008
Location: San Diego, CA
Posts: 8,718
Likes: 0
Received 6 Likes on 4 Posts
If you left the battery disconnected and it still drained, you need to have it load tested. I assume you're using a multimeter to check battery voltage too, right?
Old 10-26-09, 12:56 PM
  #3  
DarthNacho08
Thread Starter
 
DarthNacho08's Avatar
 
Join Date: Sep 2009
Location: Fontana, California
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
the battery only drains when its left plugged in, i'm thinking its the popup lights, because the passenger side is stuck up because the fender was hit and it messed up the motor. I'm gonna be replacing the popup motor so the headlights work properly, but i still don't know why it won't turn over
Old 10-26-09, 02:15 PM
  #4  
Too old for this

 
MadScience_7's Avatar
 
Join Date: Oct 2009
Location: Denver, CO
Posts: 488
Received 0 Likes on 0 Posts
Dead starter motor or starter solenoid?
Old 10-28-09, 12:35 PM
  #5  
DarthNacho08
Thread Starter
 
DarthNacho08's Avatar
 
Join Date: Sep 2009
Location: Fontana, California
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
No, its not the starter either, because after you push start it, it'll turn on with the key, it doesn't start when it sits for more than a day or so, there's nothing wrong with the engine itself, it runs like a champ when it'll turn on, just can't figure out why it won't turn over
Old 10-28-09, 02:50 PM
  #6  
Leaking FC

 
Seamoan's Avatar
 
Join Date: Oct 2009
Location: CADIZ SPAIN
Posts: 266
Received 0 Likes on 0 Posts
same thing happening with my FC excluding all the battery stuff
Old 10-28-09, 06:10 PM
  #7  
Top Down, Boost Up

iTrader: (7)
 
RotaryRocket88's Avatar
 
Join Date: Mar 2008
Location: San Diego, CA
Posts: 8,718
Likes: 0
Received 6 Likes on 4 Posts
Anywhere the car was hit in an accident is a very good place to start looking for a short. All it takes is one small wire touching the chassis to drain the battery over time.
Old 10-29-09, 07:16 PM
  #8  
DarthNacho08
Thread Starter
 
DarthNacho08's Avatar
 
Join Date: Sep 2009
Location: Fontana, California
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
I was talking to a friend of mine and he said I might have leaky fuel injectors, Think there is anything to that???
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
Jeff20B
1st Generation Specific (1979-1985)
4
06-26-16 10:21 AM
PhillyFC
General Rotary Tech Support
9
08-21-15 06:36 PM
Sharkbait24
New Member RX-7 Technical
1
08-12-15 10:36 AM



Quick Reply: 91 Rx7 won't turn over



All times are GMT -5. The time now is 07:01 AM.