87 Turbo2 idle problem HELP PLEASE!!!!!!
#1
1987 Rx7 Turbo2
Thread Starter
Join Date: Oct 2009
Location: Upper Darby
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
87 Turbo2 idle problem HELP PLEASE!!!!!!
Hi I just brought a 1987 turbo2 rx7. I new to the these cars so the problem i been havin is the car starts fine then it dies. thee only way too keep the car running is i have to keep my foot on the gas. It wont hold the idle by iits self. Can somebodi please help me out.
#7
I'm having the same problem. Except mine runs real rough while holding the gas and smokes like its flooding. I've checked multiple things(injectors, vacuum, etc). And i'm still stumped. I got it to idle once earlier today and running fine then i had to fix my clutch switch and put new plugs in and it went back to the same crap. My fuel pressure was too high at one point though. Which was part of my problem. But its still messed up.
Trending Topics
#8
1987 Rx7 Turbo2
Thread Starter
Join Date: Oct 2009
Location: Upper Darby
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
i think it may be a vac line because wen i got the car it need a new turbo gasket so i did it myself mind u that the car started and held a idle under its own power but was real rough. so after i put the new gasket n put every thing back 2 gether it started doing this ****.
#9
Ahh I see. Well I'd check any of them that you could of accidently pulled off.
Mine started after I put on my t2 AFM after my t2 swap. But the parts weren't bad I checked them all and mixed and matched a bit to trouble shoot but still no luck.
Then I checked fuel injectors for leaks, replaced plugs, fixed fuel pressure etc.
It finally held idle today with no smoke and not harsh it was purrin. Then i fixed my clutch switch and put some new plugs in and it went right back to the crap.
Mine started after I put on my t2 AFM after my t2 swap. But the parts weren't bad I checked them all and mixed and matched a bit to trouble shoot but still no luck.
Then I checked fuel injectors for leaks, replaced plugs, fixed fuel pressure etc.
It finally held idle today with no smoke and not harsh it was purrin. Then i fixed my clutch switch and put some new plugs in and it went right back to the crap.
#10
1987 Rx7 Turbo2
Thread Starter
Join Date: Oct 2009
Location: Upper Darby
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Hey guy thanks i fixed the problem i guess when i was puttin every thing back 2 gether i 4 got 2 hook up this one vac line stupid me lol. i also replaced all the intake pipen n made my own lil short ram type (looks nice) it runs now. Still need 2 mess wit the fuel mix and the timing
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM