87 Rx-7 Oxy Sensor Question
#1
Can Post Only in New Member Section
Thread Starter
Join Date: Dec 2008
Location: PA
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
87 Rx-7 Oxy Sensor Question
I'm not really car tech savvy but i manage. I want to get a Air/Fuel gauge for my rx-7. Do i have Wideband or Narrowband? Everything is stock. Non-turbo. Also, any suggestions on Pillar pods that fit well? was looking at glowshift. Thanks guys! (and girls)
Tom
Tom
#2
Former Moderator. RIP Icemark.
Factory O2 sensors are narrow band on the 91 and under models.
Easy way to check= single wire O2 sensor is more than likely a narrow band.
Easy way to check= single wire O2 sensor is more than likely a narrow band.
#3
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
A gauge on the stock O2 sensor with the emissions system in tact will tell you if the car is very rich, very lean, or in closed loop. But if you don't know how to read it, the gauge will tell you nothing.
#4
Old Fart Young at Heart
iTrader: (6)
If you want to add a wideband sensor and gauge, you can weld on a new O2 bung or use the oem one. OEM sensor mostly works under cruise/steady state driving. It will improve fuel economy during cruise. Other than that it's generally worthless. If you're looking to improve fuel economy, watch the shift light in the dash cluster and find a vacuun gauge that has the red/green/yellow range bands.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
befarrer
Microtech
3
08-22-15 05:52 PM