hey just bought a 1987 rx7 13b non turbo looking for a little help love the car but having starting issues already invested lots of $$$ anyway changed fuel pump ,fuel filter, fuel injectors, damper ,regulator, crank sensor, radiator fan is now electric fan, intake, thermostat, water pump, temp sensor, and starter the problem is when I bought the car they told me it had a leaky injector so they out a switch to control the fuel car ran rich this way did not like whole Idea of the switch so put back to factory now car would not start so I changed the injectors hoping that would repair not at all the I went and did the rest of the fuel system and all that other stuff does anyone know what my problem can be can it be the ecm car has compression and was tested thanks any info will be helpful

 

Make sure the CAS is set properly or the engine won't start. Make sure the flapper to the AFM is not stuck. Make sure you have proper fuel pressure. You can also disable the fuel system and try to use a second or two of starter fluid shot into the air intake and see if the car starts briefly before dying out. This will tell you if you at least have proper spark or not.

 

1. welcome to the board.

2. when you post, please use punctuation. throwing a whole bunch of words together only makes it difficult to read and try to figure out what you're saying. to be honest, if I didn't have to moderate these threads, I would have ignored it and moved on. I don't say that to be mean, i'm saying it because it probably means i'm not the only one that feels that way and that is potential help you've just turned away.

3. if I understand it, you bought the car recently. they told you it had a leaky injector. i'm guessing they installed some sort of cut-off switch. you bought a whole bunch of parts for it. you removed the switch and now the car won't start. is that about it?

first question is what parts had you already changed up until the last time the car ran?


EDIT: Satch posted while I was typing.

 

yeah I figured it out thanks