86 rx7 13b Dellorto dhla 48 carb.
#1
Junior Member
Thread Starter
Join Date: Oct 2011
Location: brockton, ma
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
86 rx7 13b Dellorto dhla 48 carb.
Hello, i have a 86 rx7 that was FI now its carb, but im having issues.
-engine is fully rebuild
-stock 6 port engine
-DHLA 48 i was told it came out of a 13b but i havent check the jets yet
i did clean the carb and put in a new service kit.
-holley low fuel pressure regulator
-in line fuel pump from cb performance 3 1/2lbs
-3/8 fuel hoses
OK now i did have the car running for a short time but it was really low on idle and at the time i was using a red big end fuel pump...and i think that fuel pump was way to strong so i went and bought the in line fuel pump from cb performance.
now im running the in line fuel pump sucking gas from the stock fuel pump to the carb. i have the fuel pressure set at 2.5psi but the car still wont start im not sure what else to do plz help.
-engine is fully rebuild
-stock 6 port engine
-DHLA 48 i was told it came out of a 13b but i havent check the jets yet
i did clean the carb and put in a new service kit.
-holley low fuel pressure regulator
-in line fuel pump from cb performance 3 1/2lbs
-3/8 fuel hoses
OK now i did have the car running for a short time but it was really low on idle and at the time i was using a red big end fuel pump...and i think that fuel pump was way to strong so i went and bought the in line fuel pump from cb performance.
now im running the in line fuel pump sucking gas from the stock fuel pump to the carb. i have the fuel pressure set at 2.5psi but the car still wont start im not sure what else to do plz help.
#2
brappppp brappppp
iTrader: (4)
Join Date: Oct 2009
Location: everwet washington
Posts: 347
Likes: 0
Received 0 Likes
on
0 Posts
shadyrex,
i have the same set up with a 6 port and dell carb. The fuel system is very important. you need to have a holly blue or equivalant pump drawind from the fuel tank directly, not through an exsting pump and to have a pressure regulator in line to get pressure at 7 psi, i set mine up with a fuel return also.
search the archives for dellarto 101, you will find very specific instruction I have given to get it to work really well. I have spent many dollars in tuning to get this set up to work.
you can also find the info on gruntled.com.
pm me and we can chat
Joe
i have the same set up with a 6 port and dell carb. The fuel system is very important. you need to have a holly blue or equivalant pump drawind from the fuel tank directly, not through an exsting pump and to have a pressure regulator in line to get pressure at 7 psi, i set mine up with a fuel return also.
search the archives for dellarto 101, you will find very specific instruction I have given to get it to work really well. I have spent many dollars in tuning to get this set up to work.
you can also find the info on gruntled.com.
pm me and we can chat
Joe
Thread
Thread Starter
Forum
Replies
Last Post
ncds_fc
New Member RX-7 Technical
1
08-15-15 10:06 AM
KAL797
Test Area 51
0
08-11-15 03:47 PM