5 lug conversion spindle question?
Joined: Sep 2005
Posts: 25,581
Likes: 136
From: Smiths Falls.(near Ottawa!.Mapquest IT!)
On the fronts yes.
You can put the 5 lug hub on,and then put the 4 piston brakes and vented rotors on.The shield may need to be "finessed" a bit But it can be done.( I did it.)
But what are you gonna do for the back since the bearing assembly essentially holds the 5 lug hub assembly to the back "spindle assembly".
So really just get the back intact and make sure the bushings are good.
You can put the 5 lug hub on,and then put the 4 piston brakes and vented rotors on.The shield may need to be "finessed" a bit But it can be done.( I did it.)
But what are you gonna do for the back since the bearing assembly essentially holds the 5 lug hub assembly to the back "spindle assembly".
So really just get the back intact and make sure the bushings are good.
Thread
Thread Starter
Forum
Replies
Last Post
Adaptronic S5 Turbo PNP Unit questions
_Tones_
Adaptronic Engine Mgmt - AUS
10
May 25, 2021 05:37 AM
Nosferatu
2nd Generation Specific (1986-1992)
7
Sep 5, 2015 02:13 PM