450whp FC turbo sputtering
10-24-16, 10:43 PM
#1
Can Post Only in New Member Section
Thread Starter
Join Date: Oct 2016
Location: Los angeles
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
450whp FC turbo sputtering
my fc sputters and wont make peak boost at about 4-5k and will sputter and bog the air fuel ratio goes up and then shortly after it hits boost HARD and it has done this and then stopped 3 times now and it spits alot of fire while sputtering and I would like to know if it's minor or serious, doable at home or should i take it in, and how to do it. Thank you 
10-24-16, 10:51 PM
#2
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
If you have a highly modified FC and you are asking HOW to tune it,then no offence,I would take it to someone.
Don't be shy..and foremost do not be embarrassed..ask questions..!
I had a 357hp FC and I got a tuner to do it.I didn't know **** and I didn't want **** to happen.I can wrench but know squat about ECu's
The best way is to let someone that knows work on it.If they want to teach you then that is a bonus.
Don't be shy..and foremost do not be embarrassed..ask questions..!
I had a 357hp FC and I got a tuner to do it.I didn't know **** and I didn't want **** to happen.I can wrench but know squat about ECu's
The best way is to let someone that knows work on it.If they want to teach you then that is a bonus.
10-24-16, 11:45 PM
#3
Can Post Only in New Member Section
Thread Starter
Join Date: Oct 2016
Location: Los angeles
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
If you have a highly modified FC and you are asking HOW to tune it,then no offence,I would take it to someone.
Don't be shy..and foremost do not be embarrassed..ask questions..!
I had a 357hp FC and I got a tuner to do it.I didn't know **** and I didn't want **** to happen.I can wrench but know squat about ECu's
The best way is to let someone that knows work on it.If they want to teach you then that is a bonus.
Don't be shy..and foremost do not be embarrassed..ask questions..!
I had a 357hp FC and I got a tuner to do it.I didn't know **** and I didn't want **** to happen.I can wrench but know squat about ECu's
The best way is to let someone that knows work on it.If they want to teach you then that is a bonus.
10-25-16, 06:53 PM
#4
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
that is the thing.
A tuner will look at the engine's logs while it is doing that or with the running and can diagnose it.
Broke?..aren't we all?..it's a Rotary..it will make you bleed green!
A tuner will look at the engine's logs while it is doing that or with the running and can diagnose it.
Broke?..aren't we all?..it's a Rotary..it will make you bleed green!
