RX7 GXL to T2 swap HELP!!!!
#1
Full Member
Thread Starter
RX7 GXL to T2 swap HELP!!!!
Hello RX7Club! Im in the process of beginning my T2 swap for my FC. I know that you need all engine components and transmission but I feel there are more items I need in order to complete this swap. Please let me know on what I need and for anyone who did this exact swap please give me your input and what you did. Thanks!
#3
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
Negative on the Harness.
I put a S5TII engine in an S4 car and used the S4 harness.You just gotta drop all the "unnecessary stuff" and turn some of the engine's components to compatable S4 Components..(like Injectors so they will connect to the harness).Extend a couple wires and use the s4 Throttle body and TPS..
Ya you can go to a Stand alone and create Financial limbo in buying stuff that you don't need to get going but If you start off by looking at the MANY Threads that were posted with the info that you seek then you may be able to avoid that fiasco.
Honestly Guys are doing a swap every day and post the info and many threads are already posted so the info is already up and Guys "could" post the info you seek but honestly there isn't enough space in your thread to post the info that is already up ON the Forum!
I know you are new but the Fun part is being able to USE The Forum to your benefit and it wouldn't be "fun" if you were just handed info..Mwuahhahaha..so Good luck..
I know the answer..:P..but I'm not tellin ya!
I put a S5TII engine in an S4 car and used the S4 harness.You just gotta drop all the "unnecessary stuff" and turn some of the engine's components to compatable S4 Components..(like Injectors so they will connect to the harness).Extend a couple wires and use the s4 Throttle body and TPS..
Ya you can go to a Stand alone and create Financial limbo in buying stuff that you don't need to get going but If you start off by looking at the MANY Threads that were posted with the info that you seek then you may be able to avoid that fiasco.
Honestly Guys are doing a swap every day and post the info and many threads are already posted so the info is already up and Guys "could" post the info you seek but honestly there isn't enough space in your thread to post the info that is already up ON the Forum!
I know you are new but the Fun part is being able to USE The Forum to your benefit and it wouldn't be "fun" if you were just handed info..Mwuahhahaha..so Good luck..
I know the answer..:P..but I'm not tellin ya!
#6
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
The S5 N/A harness can be used to go TII with an S5 TII engine.
Check out Rotary Resurrection (hit TECH) and there is some good info in there.
Check out Rotary Resurrection (hit TECH) and there is some good info in there.
Trending Topics
#9
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
AGAIN this swap has been done more often than Kim Kardashian has been Body waxed,..so the Many threads just need to be opened to obtain the info!
Thread
Thread Starter
Forum
Replies
Last Post
befarrer
General Rotary Tech Support
1
10-03-16 12:37 PM