1992 FD JDM Black RHD
#1
Junior Member
Thread Starter
1992 FD JDM Black RHD
2nd time FD owner, first time actually doing some real work with one..
Currently in the process of rebuilding.
Turbo I guess is a Mitsubishi?? eh gonna need entirely new turbo setup.
Has old HKS PFC F-CON, debating which ECU to switch to (input appreciated PS: I want a reliable 400-500 HP more towards 400..) Have a Power FC with commander that came with the car, although debating selling on going for haltech, link, etc..
Will be re-painting engine bay, rebuilding engine in garage, new turbo setup if anyone had some for sale, installing new injectors/rails, re-searching what else I can declutter from under upper intake manifold.
MISC; (Joint housing/rubber joint grease LEAK) have a grease splatter line vertical (when facing front bumper) on the rear frame of the car appearing to come from both sides of the central boots/joint housing... I don't know the actual terminology yet on the FD. Anyone have a clue what they are actually called so I can fix/replace,
;Will also be purchasing a V mount any input appreciated...
;Painting most components matte black. Deciding which air spray gun and paint to buy.
;engine pulled with trans, if nay questions related to removal lmk
;broke 3 makeshift breaker bars trying to take off flywheel nut (GET AN AIR COMPRESSOR AND A CHEAP AIR IMPACT (TOTAL SPENT $214 AT HOME DEPOT) impact gun kit came with a grinder, 90 degree ratchet, impact gun, and a hammer gun for $120 usd homedepot....
etc, etc, etc, refer to pics
Before (Pics are above the texts)
Rear housing compresion (pic above)
Arrival
Almost out
Stripped
Currently in the process of rebuilding.
Turbo I guess is a Mitsubishi?? eh gonna need entirely new turbo setup.
Has old HKS PFC F-CON, debating which ECU to switch to (input appreciated PS: I want a reliable 400-500 HP more towards 400..) Have a Power FC with commander that came with the car, although debating selling on going for haltech, link, etc..
Will be re-painting engine bay, rebuilding engine in garage, new turbo setup if anyone had some for sale, installing new injectors/rails, re-searching what else I can declutter from under upper intake manifold.
MISC; (Joint housing/rubber joint grease LEAK) have a grease splatter line vertical (when facing front bumper) on the rear frame of the car appearing to come from both sides of the central boots/joint housing... I don't know the actual terminology yet on the FD. Anyone have a clue what they are actually called so I can fix/replace,
;Will also be purchasing a V mount any input appreciated...
;Painting most components matte black. Deciding which air spray gun and paint to buy.
;engine pulled with trans, if nay questions related to removal lmk
;broke 3 makeshift breaker bars trying to take off flywheel nut (GET AN AIR COMPRESSOR AND A CHEAP AIR IMPACT (TOTAL SPENT $214 AT HOME DEPOT) impact gun kit came with a grinder, 90 degree ratchet, impact gun, and a hammer gun for $120 usd homedepot....
etc, etc, etc, refer to pics
Before (Pics are above the texts)
Rear housing compresion (pic above)
Arrival
Almost out
Stripped
Thread
Thread Starter
Forum
Replies
Last Post