1985 rx-7 with a 98 4.6 mustnag engine
#1
Can Post Only in New Member Section
Thread Starter
Join Date: Sep 2011
Location: illinois
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
1985 rx-7 with a 98 4.6 mustnag engine
I have a !985 rx7 with a 1998 ford mustang 4.6 in it i was wondering if anybody had any wiring diagrams for it? I also do not know how to wire up the solenoid relay. IF anybody has any advice or can help me out that would be nice thanks.
#2
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
The wiring is likely completely custom and dependant on the person who did the swap.
However you can find the stock wiring diagrams in the FSM, located at http://foxed.ca/foxed/index.php?page=rx7manual
However you can find the stock wiring diagrams in the FSM, located at http://foxed.ca/foxed/index.php?page=rx7manual
#3
Can Post Only in New Member Section
Thread Starter
Join Date: Sep 2011
Location: illinois
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Okay thanks i will check it out im really just trying to wire it up so i can at least crank it over with the ignition but im stuck on how to wire up the solenoid relay thanks for the help.