1981 12A Wireing Questions
Thread Starter
Can Post Only in New Member Section
Joined: Jul 2015
Posts: 2
Likes: 0
From: Meridian, Idaho
1981 12A Wireing Questions
Hey guys,
Just received my wireing harness for the engine on my rolling chassis. Can anyone point me to a thread that has a list of what each plug goes to, preferably with pictures. I do have a lot of experience with wireing just non with rotary or even Mazda for that matter.
Thanks,
Aaron
Just received my wireing harness for the engine on my rolling chassis. Can anyone point me to a thread that has a list of what each plug goes to, preferably with pictures. I do have a lot of experience with wireing just non with rotary or even Mazda for that matter.
Thanks,
Aaron
Last edited by MonkeyWrench; Jul 18, 2015 at 11:42 AM.
welcome to the board. 
you'll want to start by getting a copy of the FSM from Foxed.ca, then you'll want to get a hold of a Haynes manual.
it might also be helpful if you say which harness it is you're working on.
you'll want to start by getting a copy of the FSM from Foxed.ca, then you'll want to get a hold of a Haynes manual.
it might also be helpful if you say which harness it is you're working on.
Thread Starter
Can Post Only in New Member Section
Joined: Jul 2015
Posts: 2
Likes: 0
From: Meridian, Idaho
welcome to the board.
you'll want to start by getting a copy of the FSM from Foxed.ca, then you'll want to get a hold of a Haynes manual.
it might also be helpful if you say which harness it is you're working on.
you'll want to start by getting a copy of the FSM from Foxed.ca, then you'll want to get a hold of a Haynes manual.
it might also be helpful if you say which harness it is you're working on.
Thanks! And my mistake its the harness that is for the engine itself. Plugs in on the right side to a 24pin? Haha sorry I left that out kinda important xD
Thread
Thread Starter
Forum
Replies
Last Post
alphawolff
1st Generation Specific (1979-1985)
17
Nov 17, 2015 05:57 PM