New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

12a Backfire issue

Old Dec 11, 2011 | 12:49 PM
  #1  
Brock's Avatar
Thread Starter
V8 Duster
 
Joined: May 2011
Posts: 24
Likes: 0
From: Akron, Ohio
OH 12a Backfire issue

I did search around to find a answer but got nothing so here it goes, i have a 79 sa22c and its only got 46,xxx miles on it. it ran fine until i tried to experiment with taking off the exhaust and leaving it with just a pre silencer. every time i let off the gas it constantly backfires extremely loud until it reaches idle, i know the loud part is from lack of muffler but it shoots giant blue flames (that's cool and all) but its too much. i can post a vid of it doing it from in the car if needed. Thanks!
Reply
Old Dec 24, 2011 | 08:26 AM
  #2  
stezhead54's Avatar
Junior Member
 
Joined: Jun 2009
Posts: 40
Likes: 0
From: Fort Myers Fl
i would be curious to know the answer to this one also....is it a timing issue, or a fuel issue? because i have the same problem.
Reply
Old Dec 24, 2011 | 05:38 PM
  #3  
goldrotor's Avatar
goldrotor
 
Joined: Jan 2006
Posts: 1
Likes: 0
From: parkersburg
Probably running rich due to lack of back pressure. I would say timing isn't an issue if it started after removal of exhaust. I have had two first gens with modified exhausts that ran great but backfired under deceleration, resulting in the infamous 1st gen flames.
Reply
Old Dec 26, 2011 | 10:35 AM
  #4  
Brock's Avatar
Thread Starter
V8 Duster
 
Joined: May 2011
Posts: 24
Likes: 0
From: Akron, Ohio
It shoots some serious fire outta there too, its scary i dont want to catch the car on fire when i slow down haha, if i lean the mixture will it run better as well?
Reply
Old Dec 26, 2011 | 04:31 PM
  #5  
rxat2012's Avatar
Full Member
Tenured Member: 10 Years
Liked
iTrader: (3)
 
Joined: Dec 2011
Posts: 59
Likes: 0
From: pensacola, fl
do you have cats?
Reply
Old Dec 27, 2011 | 01:32 PM
  #6  
Brock's Avatar
Thread Starter
V8 Duster
 
Joined: May 2011
Posts: 24
Likes: 0
From: Akron, Ohio
Nope, took them off. all it has is the stock manifold to a presilencer that provides almost no resistance.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
Mar 15, 2022 12:04 PM
<<Ayrton>>
Interior / Exterior / Audio
0
Sep 5, 2015 09:38 PM
Steven_McKinley
General Rotary Tech Support
12
Sep 5, 2015 10:48 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 02:19 AM.