Bacon

iTrader: (12)

You know I’m in, that should give enough time to add 2 more 1600’s and turn it up to 24-25 LBS on race fuel, hopefully ill be able to make it to a dyno to see how much its laying down @ 16-17lbs.

Yea fuel pressure seemed to be the evil omen of the day, hell I bought the k&n thinking it was best flowing but watching that gauge drop to 20 psi @ 6k I was like oooohhh my god

Thanks again to Dan for setting this up, and Steve for his hard work, and help

Most of you guys know most tuners will not even bother with a car that’s not 100% ready to tune, where Steve was getting in there turning wrenches to help at any chance he could.

Btw I didn’t see him eat or really drink anything during all the tuning, is he super human or something. LOL

threerotors

I made 350 rwhp at 13.5 psi on pump gas(with the high flow cat) and I almost maxed my injectors. So Steve didn't want to push the car any harder. The A/F was 10.7 to 10.9 at full boost. The old plugs were fouled and the boost was fluctuated between 12.5 to 13.5. So we had to change the plugs and rerouted the boost vacuum lines.

I had a lot of fun hang out with you guys.

Dan - if you want to setup the next tunning session, please let us know and I will buy mid pipe and 1600 cc. Secondaries. So I can make 400+ hp like Rich's and Dan's FD

Oak

pluto

I had alot of fun this weekend guys. i wish I could have stayed at the rotorfest longer but customer comes first as always. I hope that everyone enjoys the new tune. Just like everyone said, I like to thank Dan for putting up with me the entire weekend. I know that he must have been tired of me by now staying up late everynight till 3am and up again at 8am.

Whenever you guys have it ready for me to come up there again, just let me know and I'll mark my calender.

thanks


Steve

Scrub

iTrader: (25)

hahaha, you guys are nuts!! There aren't supposed to be so many fast FDs in the area!
I'll have to talk to martin and see if he wants to have the tuning session down here before we finalize anything.

amp

iTrader: (50)

list your setup threerotors..

threerotors

350 WHP 287 TORQUE @13.5psi

- Atkins Street Port w/ 2mm "one piece" Apex Seal
- T04R with A/R 0.84 Turbine P Trim
- 3" Custom DP and HKS Manifold/Wastegate
- High Flow Cat (cost me 40 HP)
- Racing Beat Cat Back
- Apex-i Skyline GTR FMIC
- Skyline GTR fuel pump
- 550 primary
- 1200 secondary
- stock fuel line with stock regulator
- MSD 6A for Leading coil
- 4 of Trailing Plugs
- Power FC (tuned by Superman - Steve Kan)
- TEIN SS coilover
- Greddy Strut Bar
- 5 ZIGEN 18" rims (235/40/18 and 265/35/28) with Summitomo ZR rated tires
- Autometer Gauges (Boost, EGT, AFR, Fuel Pressure)
- Apex-i Super AVC-R
- Working AC/Power Steering/Power Windows/Sunroof/Bose/Touring Package

cmartinp28

he ate like 4 candy bars while tuning my car

cmartinp28

sorry dan for calling you dave


remember dan and dave in the 92 olympics? hehe anyways....

GoodfellaFD3S

iTrader: (213)

'we' had to change the plugs? who is this 'we' ?

Rich

GoodfellaFD3S

iTrader: (213)

I call him snookums

weren't you like 6 years old back then martin ?

Rich

cmartinp28

hahaha, i was actually 10 years old

Scrub

iTrader: (25)

hahahahaha


Anyway as long as everyone doesn't mind driving down to DE next month I'll get everything ready. Martin, just let me know what date you'd like to set this for. I'll post another thread for the other tuning session.

BTW, Steve I didn't mind having you over at all...had lots of fun actually, staying up that late did take a lot out of me though; I am still feeling the side effects.

FDNewbie

iTrader: (10)

Wuss 5 hrs of sleep is a GOOD night...

fastcarfreak

How about the 25 gallons of Dr. Pepper he was drinking. lol.

if you guys tune again, ill see if i can get off of work. Let me know.