Made 544 whp and 420 lb ft torque on R85 single turbo at 25 lbs. but ran out of wastegate spring, will need to put a stiffer spring for more boost. Props to Ray and his crew, excellent and couldnt be happier!!

 

Absolutely great numbers, congrats .

What fuel system are you running?

 

Thanks Rich, as far as fuel goes,
Dual 280 lph pumps, 1600 secondaries, 1000cc primaries, aeromotive fpr

 

which wastegate spring are you using?

congrats on the #s

 

Thanks, are you going to go back for more on yours? Just the 10lbs. spring, we had the greddy boost controller on its max setting

 

id like to get it tuned on c 16 i just put the 1 bar springs in my wastegate so i should see similar #s

 

When you say PFS built..

What did they exactly build??
Can you give a little more detail
Like porting, seals, rotors and etc?

Or was it on a reman with alot of PSI?

 

Nevermind ..

I found your post in the Single turbo section.

 

pretty cool. sounds liek this place knows how to build a high hp rotary!

 

Looks like they got your car wrapped up Greg. Congratulations and enjoy!

 

Thanks Dave, yes its been a while since its been on the road, but well worth the wait. We got done all the little stuff tonight and I took it out for a spin...wow the car is a rocket is all I can say and runs perfect. I see you have a new project in the works as well. I will take some pics tomorrow after I wash it as I didnt get a chance to tonight.

 

I am having an extremely difficult time getting in contact with PFS this entire week. I thought they might have closed temporary. Every time I call I get the message machine and I have not heard back from them, so I didn’t know if they were open.

Since you were there this week, I take it they are open? I had an appointment early this week but Ray was still waiting on the Power FC software to tune my car so I was unable to get it tuned, he told me to call back to see when the software would be in and I keep trying but there is no answer. They must be extremely busy if they are open.

Great numbers by the way! Your car must be a blast to drive! Ray and everyone there are awesome! Congrats!

 

I had a difficult time getting in touch with Ray as well and I know him pretty well. Don't feel to bad. I was up there on Monday and there was a ton of cars there. I imagine they have a lot on their plate right now.

 

Sweet, I seen Ray run a 9 in that car. I have 8mm film of it running 10 at MIR and one of Ray poping Carsons (old PFS employee) motor with on board camera.
I also seen that car run 10's at ATCO.

 

Cool, yes its been Extremely busy at the shop, and they are trying to get cars done, most of the time if they dont answer, it's because the dyno is running and cant hear it, or they are in the middle of something extremely important and can't get to the phone. Most of the time people dont want to leave a message, so they have no way of getting the info, but yes they are still open and ready for new business and work.

The car hooks really good considering the power output on street tires. I have some footage of that same run at MIR I believe, amazing runs it has made. Thanks again for the congrats.

 

Congrats Greg. I am the guy who was dropping his car off on Friday of last week (Charlie) while you were in there working on your car. I picked my car up yesterday and Ray told me what you guys layed down. Awesome numbers!

Ray and his crew are busy, but I have not had too much trouble getting in contact with them (good timing I guess). Anyway, IMO a top notch crew, excellent shop, and extremely knowledgeable and personable owner. I highly recommend Ray and his shop.

Charlie

 

are you going to either of the races on may 20-21 there are 2 local, a nopi 1 at mir and an nhra event at atco

 

Here are pics of my car

 

more

 

Not sure, I might, we will have to see how it goes. I agree, anyone with a FD who needs work done, Ray and his crew are the people to go to.

 

Cool, I remember you...your car is in good hands and made the right choice. The work and power speaks for itself.

 

Hey Greg...congrats on the awesome numbers, very nice FD, and I love the wheels What front bumper is that btw?

~Ramy

 

Hey Ramy,

Thanks man, I love the wheels too That is the PFS front bumper, imo, one of the best looking bumpers for the FD.

 

congrats on the numbers and as I have stated numerous times (as well as others in this thread) pfs is a top notch shop!

 

NICE numbers...i've been trying to contact PFSupercars as well this week....finally decided to drop the $$$ to fix my turbo's...still haven't heard back from them.

Anybody know their hours of operation?