need help in south jersey
08-20-05, 10:26 AM
#1
Senior Member
Thread Starter
need help in south jersey
Would there be anyone in the south jersey area that could come down and help me out with my seven.
I have done the bareblock mod and throttle body mod.
I'm just having trouble keeping the car running.
It will start but then the idle jumpes. I adjusted the tps and still no progress i changed out the throttle body and now it wont stay on.
Please if anyone can come down I will gladly pay you.
Alex
I have done the bareblock mod and throttle body mod.
I'm just having trouble keeping the car running.
It will start but then the idle jumpes. I adjusted the tps and still no progress i changed out the throttle body and now it wont stay on.
Please if anyone can come down I will gladly pay you.
Alex
08-20-05, 10:32 AM
#2
IRS 4 Life
iTrader: (12)
Join Date: Feb 2001
Location: Sicklerville, South Jersey!!
Posts: 2,634
Likes: 0
Received 2 Likes
on
2 Posts
bare block mod?
Where @ in Sj?
Is the idle hunting or jumping all over the place, have you adjusted your idel screw, did you hook up all connectors? is the map sensor hooked up?
Where @ in Sj?
Is the idle hunting or jumping all over the place, have you adjusted your idel screw, did you hook up all connectors? is the map sensor hooked up?
08-20-05, 10:35 AM
#3
Senior Member
Thread Starter
its hard to explan. i would really like it if you came down. I'm pretty close to sicklerville. I need to do this so i can register the car. I am the only person i know that works on these cars. So, I believe that with someone else with knowlege of these cars could be a great help.
Trending Topics
08-21-05, 09:25 PM
#8
IRS 4 Life
iTrader: (12)
Join Date: Feb 2001
Location: Sicklerville, South Jersey!!
Posts: 2,634
Likes: 0
Received 2 Likes
on
2 Posts
Alex,
I still say your car is possessed, LOL I need go get BaconSportsRacing Stickers cut, LMAO
Basically his car had a hunting idle like the air bleed screw was way tight, But with all the AWS system removed and the idle speed control motor not there I couldn’t get it to hold a steady idle below 1200-1300 rpm The TPS was only happy with the idle a little out of perfect spec, And it would still idle fine for 20 min, then after revving it would drop and struggle to idle then jump right back to solid idle. Very weird
But glad we got it to hold a steady idle; it needs Jim to take a look @ it either way.
Super nice and clean setup, I was definitely impressed. Keep up the good work
I still say your car is possessed, LOL I need go get BaconSportsRacing Stickers cut, LMAO
Basically his car had a hunting idle like the air bleed screw was way tight, But with all the AWS system removed and the idle speed control motor not there I couldn’t get it to hold a steady idle below 1200-1300 rpm The TPS was only happy with the idle a little out of perfect spec, And it would still idle fine for 20 min, then after revving it would drop and struggle to idle then jump right back to solid idle. Very weird
But glad we got it to hold a steady idle; it needs Jim to take a look @ it either way.
Super nice and clean setup, I was definitely impressed. Keep up the good work
Thread
Thread Starter
Forum
Replies
Last Post