Maryland guys!
11-12-05, 10:07 AM
#8704
Full Member
Join Date: Oct 2005
Location: Maryland
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
fudds in annapolis?
kewl, if you guys meet there i could bring my new baby up there.. let me know
maybe youy guys would have some spare parts laying around i could use hehe...
does anyone know if the front and rear brake rotors can be turned, with them being one piece rotor/hub combos?
kewl, if you guys meet there i could bring my new baby up there.. let me know
maybe youy guys would have some spare parts laying around i could use hehe...
does anyone know if the front and rear brake rotors can be turned, with them being one piece rotor/hub combos?
11-12-05, 11:11 AM
#8705
Zero Rotor Motorsports
iTrader: (1)
Join Date: Feb 2004
Location: Glen Burnie, MD
Posts: 2,525
Likes: 0
Received 0 Likes
on
0 Posts
We meet ~monthly at the Fuddrucker's in Columbia. Pretty much centrally located for the majority of the group.
If you check this section you'll see it's been a little tradition for about a year now. Most of the threads have the address and directions, even maps. We started at Outback but half the group came unprepared and consumed just bread and water.
At any rate, I'm not sure when it will be... I guess I'll pick a day and start a thread now
If you check this section you'll see it's been a little tradition for about a year now. Most of the threads have the address and directions, even maps. We started at Outback but half the group came unprepared and consumed just bread and water.
At any rate, I'm not sure when it will be... I guess I'll pick a day and start a thread now
11-12-05, 12:37 PM
#8706
Always Coca-Cola
Join Date: May 2004
Location: DMV
Posts: 1,542
Likes: 0
Received 0 Likes
on
0 Posts
LOL... yeah the bread and water was great.. their bread was mouth watering.. only cuz we were all hungry.. :-D....
pick a day.. and i'll let the 8's know cuz they are dieing to come to another meet. since they are getting new people just about every 3 days..
pick a day.. and i'll let the 8's know cuz they are dieing to come to another meet. since they are getting new people just about every 3 days..
11-12-05, 01:41 PM
#8707
commit(rnd()&sense-acts)
I can't believe you guys are sitting around messing with the computers and typing on THIS forum instead of out driving on a day like this!!
Unless, of course, you're stuck at work like I am!
Unless, of course, you're stuck at work like I am!
11-12-05, 04:23 PM
#8708
Jesus is the Messiah
Haha, I wasnt stuck inside all day!
I went out with Aryeh to Crazy Rays and grabbed an intercooler off a Volvo 940!!! It's the size of our radiators! $21!!one
I went out with Aryeh to Crazy Rays and grabbed an intercooler off a Volvo 940!!! It's the size of our radiators! $21!!one
11-12-05, 04:24 PM
#8709
Jesus is the Messiah
Originally Posted by NewmanFirstgen
fudds in annapolis?
kewl, if you guys meet there i could bring my new baby up there.. let me know
maybe youy guys would have some spare parts laying around i could use hehe...
does anyone know if the front and rear brake rotors can be turned, with them being one piece rotor/hub combos?
kewl, if you guys meet there i could bring my new baby up there.. let me know
maybe youy guys would have some spare parts laying around i could use hehe...
does anyone know if the front and rear brake rotors can be turned, with them being one piece rotor/hub combos?
11-12-05, 05:07 PM
#8710
Zero Rotor Motorsports
iTrader: (1)
Join Date: Feb 2004
Location: Glen Burnie, MD
Posts: 2,525
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by VAXHeadroom
I can't believe you guys are sitting around messing with the computers and typing on THIS forum instead of out driving on a day like this!!
Unless, of course, you're stuck at work like I am!
Unless, of course, you're stuck at work like I am!
I was also out to lunch with a buddy of mine, and cruising around in my other buddy's duallie since he just put 24" Alcoas on it (he's a little nutty like that).
Tonight I will be working all night long, and again tomorrow night. I honestly just don't FEEL like going for a cruise. I'm about to go take a nap so I don't fall asleep at work.
Originally Posted by Tofuball
I have some spare cars :p
11-12-05, 08:26 PM
#8712
Must...scrub...parts...
Originally Posted by Tofuball
Haha, I wasnt stuck inside all day!
I went out with Aryeh to Crazy Rays and grabbed an intercooler off a Volvo 940!!! It's the size of our radiators! $21!!one
I went out with Aryeh to Crazy Rays and grabbed an intercooler off a Volvo 940!!! It's the size of our radiators! $21!!one
I vote that the next Fudd's meeting is scheduled at around 8 PM so I can actually go to one. Who's with me?
11-12-05, 09:37 PM
#8713
Right near Malloy
iTrader: (28)
Join Date: Dec 1999
Location: Behind a workbench, repairing FC Electronics.
Posts: 7,847
Received 512 Likes
on
347 Posts
Originally Posted by Tofuball
I went out with Aryeh to Crazy Rays and grabbed an intercooler off a Volvo 940!!! It's the size of our radiators! $21!!one
What you gotta do is like the guy with the 1987 Stang 2.3 Turbo... Get three of those, sammich em together, and make custom end tanks. I think they only flow 350 CFM each... Or maybe thats the 740 IC...
Originally Posted by yearrgh
I vote that the next Fudd's meeting is scheduled at around 8 PM so I can actually go to one. Who's with me?
11-13-05, 07:57 AM
#8714
Jesus is the Messiah
The 940's intercooler is huge. It's almost as big as the radiator. It's also a stock front mount 
it doesnt need any modification or welding, I got the hoses and the brackets with it for free (they let me take the stuff)
I was thinking of mounting it upside down on the TII. the only problem with the IC is that apparently the turbo blew an oil seal, so the IC was full of oil. I'll just wash it out with gasoline.
there were few mercedies there with very nice condition seats, and an RX-7 first gen with a full RB system on it (I didnt want to bother unbolting it, it's still there, I didnt get it cuz it is for a 12a)
Most of the other cars there didnt have much worth grabbing, lots of turbos that are way smaller then even a stock RX-7 turbo though.
I checked all the other volvos in the lot, but they were only 740s and none of them still had the IC (I was looking out for you TII guys :p)
And hey, I couldnt bring you (Theo) with me cuz you're at work!!!
it doesnt need any modification or welding, I got the hoses and the brackets with it for free (they let me take the stuff)I was thinking of mounting it upside down on the TII. the only problem with the IC is that apparently the turbo blew an oil seal, so the IC was full of oil. I'll just wash it out with gasoline.
there were few mercedies there with very nice condition seats, and an RX-7 first gen with a full RB system on it (I didnt want to bother unbolting it, it's still there, I didnt get it cuz it is for a 12a)
Most of the other cars there didnt have much worth grabbing, lots of turbos that are way smaller then even a stock RX-7 turbo though.
I checked all the other volvos in the lot, but they were only 740s and none of them still had the IC (I was looking out for you TII guys :p)
And hey, I couldnt bring you (Theo) with me cuz you're at work!!!
Last edited by Tofuball; 11-13-05 at 08:00 AM.
11-14-05, 07:09 AM
#8716
Please somebody help!!!
iTrader: (1)
Join Date: Sep 2005
Location: Woodridge, IL
Posts: 1,442
Likes: 0
Received 0 Likes
on
0 Posts
I'm hurt, i would have gone up to crazy rays. 
ne who i still need a radiator, and the air tubing if im *ever* going to make this car legal. i pretty much need wheels to get to work so that's kinda a priority...
ne who i still need a radiator, and the air tubing if im *ever* going to make this car legal. i pretty much need wheels to get to work so that's kinda a priority...
11-14-05, 07:47 AM
#8718
Man I destroyed some tires at the mazda event on Sat. The miata handles great. I had a great time but I am still never buying a miata.
Anyways I got the console panels done. We put 2 extra coats of clear on this time for a total of 6 coats. I like this setup better and we will do all our stuff with 6 coats now.
Now I will add my vert top switch to this and it should come out great.
Anyways I got the console panels done. We put 2 extra coats of clear on this time for a total of 6 coats. I like this setup better and we will do all our stuff with 6 coats now.
Now I will add my vert top switch to this and it should come out great.
11-14-05, 08:49 AM
#8720
yeah I will make you some triangle vents. I need a clean set first to use as a mold. Are 86-91 the same? and these will just be slash cut for the vents. Nothing crazy because these might look ghetto.
11-14-05, 08:52 AM
#8721
Originally Posted by Tofuball
I have a stack of wheels man :p A bloody STACK.
Anyway, I plan to go up to some other Crazy Rays locations later, stick around.
Anyway, I plan to go up to some other Crazy Rays locations later, stick around.
Jason,
the crazy rays off 695 is the best one. Its all organized and you have room to get the parts off the cars. No double stackers. And its not a mud pit which is always good. the one in b-more is not worth the drive. way to small and the only have one white 86 NA
11-14-05, 10:44 AM
#8723
Right near Malloy
iTrader: (28)
Join Date: Dec 1999
Location: Behind a workbench, repairing FC Electronics.
Posts: 7,847
Received 512 Likes
on
347 Posts
Originally Posted by Tofuball
And hey, I couldnt bring you (Theo) with me cuz you're at work!!!
What color was the FB?
11-14-05, 11:43 AM
#8724
Junior Member
Join Date: Aug 2005
Location: Nigeria
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Bukwild
Jason,
the crazy rays off 695 is the best one. Its all organized and you have room to get the parts off the cars. No double stackers. And its not a mud pit which is always good. the one in b-more is not worth the drive. way to small and the only have one white 86 NA
the crazy rays off 695 is the best one. Its all organized and you have room to get the parts off the cars. No double stackers. And its not a mud pit which is always good. the one in b-more is not worth the drive. way to small and the only have one white 86 NA