Looking for some tuning help for my Fc turbo II nj/pa
Thread Starter
Junior Member
Joined: Jun 2018
Posts: 11
Likes: 0
From: Asbury, NJ
Looking for some tuning help for my Fc turbo II nj/pa
Can anyone recommend a good tuner for my FC? I’m located in bucks county PA. I have the following mods and need a good tune.
Mods (Mechanical)
13B street port
Adaptronic ECU
720/1000 injectors
Electric fan
Fluidyne radiator
130 amp Ford Tempo Alt
Greddy FMIC
BNR stage 3 turbo
fuel pump rewire
Aeromotive 340 lph pump
3" Downpipe
2.5 RB Exhaust
thanks,
Mods (Mechanical)
13B street port
Adaptronic ECU
720/1000 injectors
Electric fan
Fluidyne radiator
130 amp Ford Tempo Alt
Greddy FMIC
BNR stage 3 turbo
fuel pump rewire
Aeromotive 340 lph pump
3" Downpipe
2.5 RB Exhaust
thanks,
Also need extensive tuning on my FD.
NOT trying to hijack this thread whatsoever but maybe it will help find you tuner if there are two people looking in the same area. I can post specs as well if needed OR will delete this response if OP wishes.
NOT trying to hijack this thread whatsoever but maybe it will help find you tuner if there are two people looking in the same area. I can post specs as well if needed OR will delete this response if OP wishes.
The Ancient
Joined: Mar 2001
Posts: 2,629
Likes: 244
From: Pennsylvania
There are couple of guys in the Bethlehem/Allentown area who could help out. Yordan Battista and Chris Sanders come to mind. Both used to work at Speed1/KD Rotary. I can give you their contact info. Yordan is snglturboFD@gmail.com. I'll have to dig for Chris' email. They'll both be at my BBQ next Saturday. Ihor Huk from IRP will be there as well as about 40 other Rx7 owners. There might be some other tuners there who could help.
Thread
Thread Starter
Forum
Replies
Last Post
MIKE-P-28
Haltech Forum
24
Dec 20, 2007 05:05 PM
rotor
General Rotary Tech Support
3
Apr 25, 2003 03:47 PM
JAMMNN
3rd Generation Specific (1993-2002)
5
Mar 19, 2002 01:33 AM
