Hampton Roads (SE Virginia) Rotary Club
#9453
Total Rotary Domination!
iTrader: (17)
Kenny, I sent you two emails already amd PM'ed you here. My email is rotaryhaven@yahoo.com. I will PM you and Yoshi my new number.
#9462
Full Member
I never registered it with them so I didn't get the usergroup invite. I should have lol but from what I understand it takes a while now and you have to pay for it
#9463
Full Member
Hey I found my datalogit cd after going through some stuff I had in storage. But on a seperate note is anyone here good with checking for vacuum leaks or boost leaks? Im still not hitting full boost like I should be and I get idle bounce from 500 to 1300 or so when I put my car in neutral after driving it slowly. Mostly occurs only in 1st or 2nd gear.
#9464
Rotary Freak
iTrader: (1)
Join Date: Oct 2003
Location: Hampton, Va
Posts: 2,506
Likes: 0
Received 0 Likes
on
0 Posts
Hey I found my datalogit cd after going through some stuff I had in storage. But on a seperate note is anyone here good with checking for vacuum leaks or boost leaks? Im still not hitting full boost like I should be and I get idle bounce from 500 to 1300 or so when I put my car in neutral after driving it slowly. Mostly occurs only in 1st or 2nd gear.
What mods do you have?
For the bouncing idle, I'd check the TPS values.
#9465
Full Member
Yea im definitely happy I found it
Ok so for mods I have a street ported motor, built back in december.
Apexi RX6 turbo, AVCR, PowerFC, Apexi Intercooler, 550/1600cc inj, apexi wastegate...my catback is a 2.5" though so that's a little restrictive. basically it's building boost slowly and will hit .62 bar with wastegate, .71 bar with AVCR on but .9 bar is what it's set at. im thinking boost leak but i dunno for sure. also my wideband is not reading right anymore
#9466
Rotary Enthusiast
iTrader: (1)
Join Date: Mar 2008
Location: VA Beach
Posts: 797
Likes: 0
Received 0 Likes
on
0 Posts
Yea im definitely happy I found it
Ok so for mods I have a street ported motor, built back in december.
Apexi RX6 turbo, AVCR, PowerFC, Apexi Intercooler, 550/1600cc inj, apexi wastegate...my catback is a 2.5" though so that's a little restrictive. basically it's building boost slowly and will hit .62 bar with wastegate, .71 bar with AVCR on but .9 bar is what it's set at. im thinking boost leak but i dunno for sure. also my wideband is not reading right anymore
Ok so for mods I have a street ported motor, built back in december.
Apexi RX6 turbo, AVCR, PowerFC, Apexi Intercooler, 550/1600cc inj, apexi wastegate...my catback is a 2.5" though so that's a little restrictive. basically it's building boost slowly and will hit .62 bar with wastegate, .71 bar with AVCR on but .9 bar is what it's set at. im thinking boost leak but i dunno for sure. also my wideband is not reading right anymore