Hampton Roads (SE Virginia) Rotary Club
Junior Member
Joined: Aug 2004
Posts: 33
Likes: 0
From: chesapeake, VA
do you guys know of any trustworthy shops in the area for engine work?
im pretty sure all of my coolant seals are blown(at least thats what i gather from the forums) and i also need some brake work done. if anybody on the forums would be able to do it i could pay them too, i just need a car to drive.
thanks,
josh
im pretty sure all of my coolant seals are blown(at least thats what i gather from the forums) and i also need some brake work done. if anybody on the forums would be able to do it i could pay them too, i just need a car to drive.
thanks,
josh
Joined: Apr 2002
Posts: 1,916
Likes: 1
From: Hampton, Virginia
Originally Posted by domestickilla
do you guys know of any trustworthy shops in the area for engine work?
im pretty sure all of my coolant seals are blown(at least thats what i gather from the forums) and i also need some brake work done. if anybody on the forums would be able to do it i could pay them too, i just need a car to drive.
thanks,
josh
im pretty sure all of my coolant seals are blown(at least thats what i gather from the forums) and i also need some brake work done. if anybody on the forums would be able to do it i could pay them too, i just need a car to drive.
thanks,
josh
You can call me at 757-593-5168......
Jerry
Originally Posted by JerryPerez
You can call me at 757-593-5168......
Jerry
Jerry
Originally Posted by JerryPerez
Coincidently, I am working all htree days. Tue, Wed, Thur in the daytime. I would have to Sat, Sun, Mon, Fri or after 7pm on my work days......
Jerry
Jerry
Joined: Apr 2002
Posts: 1,916
Likes: 1
From: Hampton, Virginia
Hello People,
Check out my son's car, I have dehonda-ized him. Check out his new ride. I have to work some minor issues like fuel pulsation leak and some other stuff but the motor runs strong, cold a/c and doesn't look bad for a Maaco job...
Check out my son's car, I have dehonda-ized him. Check out his new ride. I have to work some minor issues like fuel pulsation leak and some other stuff but the motor runs strong, cold a/c and doesn't look bad for a Maaco job...
Thread Starter
Rotary Freak
Joined: Sep 2001
Posts: 1,542
Likes: 0
From: VA
The car looks nice Jerry. Glad you turned him from the dark side.
Next meet is comming up in a week or so....
This is the link to RSVP
http://rx7.meetup.com/55/calendar/5411384/
So far there are 12 people signed up to be there. We gotta get Jerry to actually come to an event for a change.... He shows up once a year... it is about time :-)
Kenny, I am going to have new carpet put in my house sometime in the next couple of months. If I give you room measurements or something like that can you give me a ballpark estimate. Nothing I would hold you to of course.
Next meet is comming up in a week or so....
Hampton Roads Mazda Rotary Car Club February Meetup
Ok, it is still cold out. The next meet is back at the karting track. I have picked 6:00 but does anyone have more of a recommendation for time? If we go earlier we run on the smaller track, if we run later we run on the super track.
Let me know if you have a preference of time.
When:
Saturday, February 17, 2007 at 6:00 PM
Where:
American Indoor Karting
2884 Airline Blvd
Portsmouth, VA 23701
757.405.9715
Ok, it is still cold out. The next meet is back at the karting track. I have picked 6:00 but does anyone have more of a recommendation for time? If we go earlier we run on the smaller track, if we run later we run on the super track.
Let me know if you have a preference of time.
When:
Saturday, February 17, 2007 at 6:00 PM
Where:
American Indoor Karting
2884 Airline Blvd
Portsmouth, VA 23701
757.405.9715
http://rx7.meetup.com/55/calendar/5411384/
So far there are 12 people signed up to be there. We gotta get Jerry to actually come to an event for a change.... He shows up once a year... it is about time :-)
Kenny, I am going to have new carpet put in my house sometime in the next couple of months. If I give you room measurements or something like that can you give me a ballpark estimate. Nothing I would hold you to of course.
Last edited by calvin; Feb 9, 2007 at 09:40 AM.
Originally Posted by calvin
The car looks nice Jerry. Glad you turned him from the dark side.
Next meet is comming up in a week or so....
This is the link to RSVP
http://rx7.meetup.com/55/calendar/5411384/
So far there are 12 people signed up to be there. We gotta get Jerry to actually come to an event for a change.... He shows up once a year... it is about time :-)
Kenny, I am going to have new carpet put in my house sometime in the next couple of months. If I give you room measurements or something like that can you give me a ballpark estimate. Nothing I would hold you to of course.
Next meet is comming up in a week or so....
This is the link to RSVP
http://rx7.meetup.com/55/calendar/5411384/
So far there are 12 people signed up to be there. We gotta get Jerry to actually come to an event for a change.... He shows up once a year... it is about time :-)
Kenny, I am going to have new carpet put in my house sometime in the next couple of months. If I give you room measurements or something like that can you give me a ballpark estimate. Nothing I would hold you to of course.
No problem
Va
My "little" brother got a new car
Nope not a rotary, but a new 07 Acura TL Type S. Pretty sweet.
Notice the sweet FD in the reflection
Notice the sparkles
Paddle shifters for the "tiptronic" auto/manual tranny are somewhere behind the
steering wheel.
Notice the sweet FD in the reflection
Notice the sparkles
Paddle shifters for the "tiptronic" auto/manual tranny are somewhere behind the
steering wheel.
Does anybody want to make a few bucks? I tried to change my clutch this weekend, but the stud and bolt on the starter did not want to play nice. I tried to cut the bolt off, but that didnt work, then the stud decided to turn, but not come out. So if anybody wants to make a few bucks pm me. I dont have the tools to do it, and I was afraid to cut the bolt at the hobby shop and not have anything to put back in.
ok parts guys, looking for series 5 power steering pump, mine just seized up on the way home. Started shooting fuild thru the fill tube. So this one's toast. Anyway looking for the cheap nasty one from the series 5 with the two hoses. Just PM with price and wear to pick up. Thanks guys!
Originally Posted by jl1rx7
ok parts guys, looking for series 5 power steering pump, mine just seized up on the way home. Started shooting fuild thru the fill tube. So this one's toast. Anyway looking for the cheap nasty one from the series 5 with the two hoses. Just PM with price and wear to pick up. Thanks guys!
Originally Posted by jl1rx7
ok parts guys, looking for series 5 power steering pump, mine just seized up on the way home. Started shooting fuild thru the fill tube. So this one's toast. Anyway looking for the cheap nasty one from the series 5 with the two hoses. Just PM with price and wear to pick up. Thanks guys!
Ok Thanks guys, I heard that pick and pull on Va beach blvd had a s5, so I am going to check that out. Va just let me know price and were you want to meet you and I will buy it from you, if pick and pull doesnt work out.
Thread Starter
Rotary Freak
Joined: Sep 2001
Posts: 1,542
Likes: 0
From: VA
Originally Posted by jl1rx7
ok parts guys, looking for series 5 power steering pump, mine just seized up on the way home. Started shooting fuild thru the fill tube. So this one's toast. Anyway looking for the cheap nasty one from the series 5 with the two hoses. Just PM with price and wear to pick up. Thanks guys!
Thread Starter
Rotary Freak
Joined: Sep 2001
Posts: 1,542
Likes: 0
From: VA
guys, I got a message today from one of the managers of the Time Lounge in Norfolk.
Hi Calvin! My name is Sherri Davis. I am the Marketing
Director for Time Lounge, located in downtown Norfolk. I was
hoping to speak with you about possibly hosting an evening out
for you and the rest of the members of your organization. We
would like to invite everyone (and any guests that they would
like to bring) to enjoy:
-Free cover
-Drink Specials (including $2 u-call-its, whatever your
members and thier friends would like to drink is only $2!
Discounts on our martini and wine specialties)
-A free gourmet Italian Dinner Buffet
-Reserved seating
There is absolutely no cost for this event, we would just like to have you
and the rest of the members of your club as our guests for the evening. All
we would need to do is decide on a date for the event. If you are
interested, or if I can answer any questions concerning this offer please
feel free to give me a call at (757)XXX-XXX or you can email me at
XXXXXXXXX@XXXXX.com. You can also check out our club at www.
TimeLounge.com to get a better idea of what our establishment
is like. Thankyou for your time, and I hope to hear from you
soon!
Sincerely,
Sherri Davis
Marketing Director
Time Lounge
Anyone interested in trying to have a meet here? I have been to the place, and it is nice, in the 200 block of Granby Street (I used to work at 253 Granby St). I think there is an age limit so it would probably exclude people inder 21 (not 100% sure about that, just speculating). Anyway if you guys think it is something we should do I can arrange it.
Hi Calvin! My name is Sherri Davis. I am the Marketing
Director for Time Lounge, located in downtown Norfolk. I was
hoping to speak with you about possibly hosting an evening out
for you and the rest of the members of your organization. We
would like to invite everyone (and any guests that they would
like to bring) to enjoy:
-Free cover
-Drink Specials (including $2 u-call-its, whatever your
members and thier friends would like to drink is only $2!
Discounts on our martini and wine specialties)
-A free gourmet Italian Dinner Buffet
-Reserved seating
There is absolutely no cost for this event, we would just like to have you
and the rest of the members of your club as our guests for the evening. All
we would need to do is decide on a date for the event. If you are
interested, or if I can answer any questions concerning this offer please
feel free to give me a call at (757)XXX-XXX or you can email me at
XXXXXXXXX@XXXXX.com. You can also check out our club at www.
TimeLounge.com to get a better idea of what our establishment
is like. Thankyou for your time, and I hope to hear from you
soon!
Sincerely,
Sherri Davis
Marketing Director
Time Lounge
Last edited by calvin; Feb 13, 2007 at 03:34 PM.
calvin I say we should do that, talk to the rx8 club and see about a joint meet, I think it would be fun, plus who can beat free stuff! I know about the car parts thing, i always seem to be like a week late. I had been looking for a good cheap used one to keep on hand, but hadnt seen any. But you know as well as I do with old cars you can never find the part you need until it to late! I dont think I will make this weekend, since I am going to try clutch round two, and If I can get out to pick and pull before dark I will see if that car is still in one peace. One of the guys I work with said it was all in one piece and looked like it was in good shape. That was on saturday so who knows by now.
Not a Racist
Joined: Aug 2003
Posts: 1,514
Likes: 0
From: virginia
Originally Posted by ProjectR13B
that sucks man. the thing i loved most from my fc was the powersteering.... well not really the most, but it was convinient