location is
212 lincoln highway fairless hills pa 19030 .. close to I95 and NJ

It is just past the perruzzi nissan dealership on the right behind the macco building.
This is a clean and fessional location and simple to get to.

We can run any foreign or domestic car, truck, motorcycle and ATV. he is EFI 101 and EFI advanced certified so he can handle any engine management system that you have.

the dyno is a new Dynocom 5000 2WD eddy brake twin 8.5 inch roller chassis dyno. It can handle up to 1250whp and can perform steady state load and inertia testing. This means that you can get your true horsepower level on a single pull and perform various load testing to get the best numbers for the street and track app.

im trying to get a good turn out for a weekend in April. would be nice to get at least 8 cars in on this, i have a guy that will take high def video of your cars on the dyno and a shot of the dyno numbers only if you want when it is done.

please feel free to chime in where just throwing this out there to see if theres interest & would like to come out and meet up..

Dyno rates and specials
$60 for 3 pulls on one car with AFR readings
$100 for 3 pulls on two cars with AFR readings
$135 for 3 pulls on three cars with AFR readings
$160 for 3 pulls on four cars with AFR readings
$30 for 3 pulls on a motorcycle or ATV

 

nobody from this community wants to chime in?

 

As long as more than four cars go on the rollers it would be $40 for three pulls. This is our new location and it is much cleaner and a more professional location. Working on getting a couple rotary drag cars to come out as well.
Brian at Twisted Tuning

there also 100 octaine pump in there erea

just a link to the other listing for this http://www.tristatetuners.com/forum/...=1#post2112839
would be nice to have some local club members there

 

I replied on TST. I would like to do 3 pulls depending on the date.

 

only rex's? I know a bunch of jersey vette guys who would love a dyno day, but wouldn't want to sabotage a rex meet.

 

not at all buddy, im not getting much from the guys here so its what ever wants to get on the rollers. i have alot of interes coming from a tristate forum but beat the drums on anybody that would want to get a good meet going

3 pulls $40, 100 octaine fuel not to far from the shop, many places for food and drinks, close to 95, turnpike, nj. for anybody wanting to head to the meet after im sure theres some street runs going on. there a 690hp 911tt running the show rite now with alot of good things to look at.. http://www.youtube.com/watch?v=sNaj9...4&feature=plcp

you can youtube. twisted tuning to see the dyno setup well be doing pulls on.
this vidoe will also be the same guy for your vids at the meet if you want them. really clear hd

 

Bumpin' this up...hope to have my turbo swap done before then! If not I'll be there anyway.

 

im heading there now to figure out what a good weekend for this in april. ill post it up tonight

 

Dates Set for 4/15/12. Ill have a time tonight

 

am down

 

were going to get there between 9-930

im thinking the first lot would be easier for you if you bring a tralier.

 

how is the 15th for you?

 

4/15 works for me.

 

starting at 10am..till when ever

 

counting them down

 

I'll probably come and watch. I'll try to drum up some interest with the offline crowd.

 

I am going, hoping for nice day for cruising prolly not doing any pulls

 

sounds good and hope to meet some new guys.

 

anymore info on this? my car is in pieces but i'd like to chill with some fellow rotorheads.

 

if i can get these effin hub bearings in ill be there

 

One week away. Make sure you guys have fresh oil, no fluid leaks, no vacuum leaks, rear tires that hold tire pressure, rev limits set, good condition trannies, proper gas and boost limits set. No slicks allowed on the dyno. We are the third building behind the maaco in the falls autocomplex. Call 215-310-8851 for directions or questions.

 

so whos definitely stopping in