Converting one of my N/a
Thread Starter
Eats, Sleeps, Dreams Rotary
Joined: Jun 2005
Posts: 3,154
Likes: 1
From: Queens, NYC
Converting one of my N/a
Hey i am converting my n/a into turbo. I already have the motor and tranny but still need a ECU. shOULD I get a stock Ecu or get an aftermarket one, what else do i need to do to fully convert the car. It was non turbo with an auto transmission, i stilll need to find a set of manual pedals> what else is there
Thanks
Jason
Ill post pics later
Thanks
Jason
Ill post pics later
Last edited by ROTARYROCKET7; Oct 13, 2005 at 07:57 PM.
Thread Starter
Eats, Sleeps, Dreams Rotary
Joined: Jun 2005
Posts: 3,154
Likes: 1
From: Queens, NYC
Originally Posted by John64
Start off by getting rid of the signature.
Play Well
Joined: Feb 2005
Posts: 4,218
Likes: 0
From: We're all fine here now, thank you. How are you?
ok there is a faq on this in the 2nd gen forums. But neways you will need the T2 drive shaft rearend half hafts and knuckles along with the Turbo harness and ECU (j-Spec or US spec). umm there are a few other things like time and a **** load of patience.
here is a write up on the auto to manual swap
http://www.rotaryresurrection.com/ro...er/5speed.html
And here is the write up for the turbo motor swap the correct way that it supposed to be done not that half *** **** some ppl call a swap.
http://www.rotaryresurrection.com/ro...conversion.htm
ignore the stuff at the top of the page just scroll down and youll find the info you need. Hope this helps.
here is a write up on the auto to manual swap
http://www.rotaryresurrection.com/ro...er/5speed.html
And here is the write up for the turbo motor swap the correct way that it supposed to be done not that half *** **** some ppl call a swap.
http://www.rotaryresurrection.com/ro...conversion.htm
ignore the stuff at the top of the page just scroll down and youll find the info you need. Hope this helps.
Play Well
Joined: Feb 2005
Posts: 4,218
Likes: 0
From: We're all fine here now, thank you. How are you?
oh yeah i forgot to ask what was wrong with the old NA motor. I am looking for one that I can trade a car for. Or I am also selling 2 of my cars a 84 base model RX7 and a Starion if your interested.
Thread Starter
Eats, Sleeps, Dreams Rotary
Joined: Jun 2005
Posts: 3,154
Likes: 1
From: Queens, NYC
Originally Posted by fcdrifter13
oh yeah i forgot to ask what was wrong with the old NA motor. I am looking for one that I can trade a car for. Or I am also selling 2 of my cars a 84 base model RX7 and a Starion if your interested.
hit me up on AIM: NycRotaryRocket lol
ight
peace
1
Trending Topics
Always Coca-Cola
Joined: May 2004
Posts: 1,542
Likes: 0
From: DMV
might as well upgrade clutch and flywheel while you got the engine out.. i have a HDSS clutch with a lightweight RB FLYWEEL.. it really catches like no other.. since you are goin turbo.. lots of other options are available.. ( i still prefer my n/a)
Play Well
Joined: Feb 2005
Posts: 4,218
Likes: 0
From: We're all fine here now, thank you. How are you?
well the FB just make an offer its not complete and needs a fuel pump to run the upgraded carb. I am trying to get around $1000 gathered up so I can buy my new motor and move to Lyons NY with my GF.
SO just make and offer Ill try to hit you up on AIM with pics and **** like that
SO just make and offer Ill try to hit you up on AIM with pics and **** like that
Full Member
Joined: Feb 2003
Posts: 156
Likes: 0
From: nepa
is you car an s4 or s5? if its a s4 you might have problems with the body harness pluging in because the motor in the pics is a s5. you can keep you n/a rear and get a t2 to n/a driveshaft but they are around $300
Thread
Thread Starter
Forum
Replies
Last Post