a rotary tuner out on LI, his name is Enzo (not sure of his last name or of his shops name). i've heard his name thrown around before, but whenever i try to find some info about him on here nothing ever turns up.

anyone point me in the right direction? or even better yet, has anyone had a car tuned by him before?

 

up

 

My friend is getting his haltec setup tuned by him in the near future, he was recommended by a pretty reputable rotary guy on the island. He said to tell you to look up JBE racing, thats Enzo's partners.

 

thanks for the info i had him recommended to me by the local dyno shop out here, which is why i ask. i'll check into that JBE Racing

 

enzo is a good friend of mine and a great tuner. he tunes my haltech in my fd and will be installing and tuning my aurtonic sm4 very soon. his screen name on here is enzo250, send him a PM his shop is in bay shore long island next door to JBE racing.
ive always been happy with his tuning and customer service, i think you will be too.

Roan

 

thanks Roan yea i found out his s/n on here the other day and have since been in contact with him thru PM's, hopefully we can get somthing set up!

 

Yo Roan, whats up man... Check out this thread I told Joe about it.... It's a GOOD spot to get a meet going. Jimbo.

BELMONT RACETRACK CAR SHOW

 

Old thread, but anymore testimonials/history of Enzo's Tuning? Been thinking of bringing my car to Enzo's also. Any help would be appreciated, thanks!

 

im thinking of taking 2 cars to him. we all know he throws down some hp in his rotarys and just by talk on here and reading things i have faith lol. i figured he is the closest best rotary tunner i can think of. iM in OHIO, the only place here is define autoworks and i just cant bring myself to trust them yet. his shop is like 9 hours from me.

 

Go to Enzo, you won't regret it.

 

Can you expand on this? I am looking for specific information/experience with this tuner.

 

+1 for enzo.. hes the only one i will let tune my car.. he does an amazing job and really helps me out with any questions or anything i need...

 

I'm going on 8 years of enzo being the only tuner to touch my car. I've always been happy with the tunes, the time he takes to get the details right, (driveability, cold start ect) not just make big HP.

I've never had a tuning related engine failure since he has been tuning my car. I value my reputation in this comunity more than I value putting $$ in enzo's pocket, and wouldn't recomend him publically if I wasn't confident in his ability.

 

He knows a large number of ECUS, Autronic, PFC, Haltech, Microtech, Fast, Big Stuff, TEC3 to name a few. Most on here know him for tuning rotaries, but he also tunes power boats and piston cars. He now has an AWD drive dyno.

He races his car and has gone 9.0 in testing. Awesome benefit if you are racing too since your tuner is at the track with you. He built a car for his brother (turbor1) that went 10s (GT35) first pass and 9s (S475) shortly after.

He has experience with fuel, gas, methanol, E85 and E98 etc. His shop is in a safe area of Long Island. He works alone. Most tuners are "stuck" on one ECU, he tunes them all.

Anthony

 

Thanks a lot for this info Roan & Anthony, this is exactly what I was looking for. Very, very helpful! It definitely means a lot for you two to "vouch" for Enzo. B/c as we all know, a well put together tune on these cars is probably one of the most important aspects to have.

Either way I look forward to speaking with him once this snow stops falling.

Thanks again,

Ryan

 

He also does my car very gd tuner

 

Enzo is a very good tuner, he really goes through everything and not only tunes for big numbers. My car runs as smooth as when it was stock. I will be going back to see him since I changed a couple of things and tuning for E85.

 

Thanks guys for the positive feedback. I try...

 

Bump, anymore testimonials would be appreciated

 

I have not had my car tuned by Enzo personally, but my cousin has with his 89 vette with bigstuff. Also a buddy with a mbm fd in the area has as well with a PFC. Both were satisfied with their tunes. ]

I did want to have Enzo tune my last car, but it met a Chevy Tahoe before i could i could have it tuned. I was doing a few extra things here and there to have it done. I have a PFC currently.

I do plan on going to Enzo in the future for a tune that's for sure. From what i have heard Enzo specializes in Autronic.

 

go to el rookie or mike from speed world in li ny .. both have experience rotary engines . all other rotary shop in west queens are crooks and thieves\\\ beware///

 

Wow, I know this is an old thread but seeing that it got bumped I should probably add that I DID end up having Enzo tune the car back then, and he did an amazing job! So add another testimonial to the list, he took alot of time with it to make sure everything was just right, no regrets at all

Hope things are still going well Enzo!

Jay

 

good decision.
Had my car tuned by him to not too long ago, will be heading back soon since I did some "upgrades"