i'll try to get someone to cover my sunday night shift if yall really want to ride out and drive some where else..

 

Yeah Gabe is 6 months he's always picking up the ladies. Definatly a ham.

Joey brought his kids too. We like to keep it a family event

 

1) Crash Test Joey
2) Falnfenix
3) RX-Midget
4) x0ny
5) eage8
6) Coke!!!
7) DarkAngelKamui
8) f1bluerx7 - Mike
9) Shannon + Gabe
10) NeptuneRX (woot for sunday meets!)
11) Enkidu + his FC (hopefully nothing happens!)
12) 70% chance of Tofuball
14) 71% chance of SGOF
15) Eightman1977 + SE (FC's on the drawnin board)

 

ummm, do I have to ask permission to be added to this meet list, or is it open?

 

lol, quite open old chap, so long as you aren't of the ricer type..... don't want to seem like a lot of arrogant elitists, now do we?

 

Haha! That's alright. I don't think I'll be too ricey for you guys. I guess you'll all be able to judge for yourselves though. Thanks.

 

Guard weekend - but if you're still there around 430 i might make it - Putting engine back in the car this week

 

awesome, give me a call and I'll help out...

 

Hey I need help taking a motor out of my FC, and pulling out all the wires and good stuff like that. Anyone wanna help? Looks like we'll have a ton of rotaries there again. I'll be sure to bring the camera for those photo oppertunities!

 

I'd help, but the only thing I know how to do with rotaries is take them completely out and replace them with V8's

 

well i have no exp in pulling motors.. so i could come pass and learn for when i'm ready for my rebuild.. i'm sooooo close to 100K miles!!

 

even though it's a turbo and everything is in like totally different places I'm sure he wouldn't mind the more help.

-Myk

 

I've pulled a bunch of engines... Mine's out right now sitting next to my tranny!

 

My Engine removal tools: Cherry picker, Sawzall, 4 foot long crowbar. Sockets OR plasma cutter.)

4 easy steps.

Step 1. lift front of car with cherry picker
Step 2. Unbolt transmission, starter and engine mounts (substitue with plasma cutter if sockets unavail.)
Step 3. Sawzall off pretty much everything surrounding the engine. Remeber your safety eyewear, as fluids will fly everywhere and blind you.
Step 4. keep cranking on the cherry picker untill the motor seperates violently (I stress violently for dramatic effect here) preferrably flying uncontrollably into the air. Use crow bar if neccessary

PS: I hope you didn't want to put it back in.

 

do you guys do any real drivin b/c i'm just breakin in my motor and dont know if it will be ready then. if not ill be there. and if anyone is in the rahway area and want to meet up to take the ride that would be cool.

 

1) Crash Test Joey
2) Falnfenix
3) RX-Midget
4) x0ny
5) eage8
6) Coke!!!
7) DarkAngelKamui
8) f1bluerx7 - Mike
9) Shannon + Gabe
10) NeptuneRX (woot for sunday meets!)
11) Enkidu + his FC (hopefully nothing happens!)
12) 70% chance of Tofuball
14) 71% chance of SGOF
15) Eightman1977 + SE (FC's on the drawnin board)
16) suds (joey, can you just put my name on the next one for me? )

 

we don't really drive at all just eat and stand in the parking lot and talk... if your car isn't ready you can just come without it like I have for the past like 3 meets

-Myk

 

it's a non-turbo motor coming out, but a turbo'd motor is going in. I still want to do the 20b, but now I'm thinking in the way of a 13b renisis, due to the low mounting design. Not 100% sure yet, which route I'm going to take, cause here's my choices. Fully built 20b, with race tranny, stronger axles, and different rear end, about 35,000, but we're talking between 600 rwhp on low boost and pump gas, and 950 rwhp high boost and race gas. 13b renisis, not sure how well the motor handles boost, but it could seriously be interesting. Maybe lightend rotors, greddy turbo kit, 3 mm racing apex seal, some "fine tuning" of the computer, light weight fly wheels, high perf clutch, lightend essentric shaft, and see what a Renisis is capable of, oh don't forget the FC's lighter then the 8 so that helps out too.

Anyways back to the subject at hand, I'm looking forward to this meet, hopefully the weather will be really nice.

 

1) Crash Test Joey
2) Falnfenix
3) RX-Midget
4) x0ny
5) eage8
6) Coke!!!
7) DarkAngelKamui
8) f1bluerx7 - Mike
9) Shannon + Gabe
10) NeptuneRX (woot for sunday meets!)
11) Enkidu + his FC (hopefully nothing happens!)
12) 70% chance of Tofuball
12.9) Icesickkle (The guy always wearing the AUDI hat)
14) 71% chance of SGOF
15) Eightman1977 + SE (FC's on the drawnin board)
16) suds (joey, can you just put my name on the next one for me? )


The chance of my car being there is dependent on F1blue giving me his number and how fast I can swap the engine and/or rebuild...(normally a week llong job)

 

EightMan!!! what day are you pulling the motor?? and uh.. can i bum it off ya for a cheap price so i can practice working on it..??

and Hope you can make it there!!

 

Your talking about a drag car at that point. You might as well take the car to a fabricator and give them your check book.

I think a more practical, and in the end, a more enjoyable streetable car, would be a 20b with stock twins, or a medium sized (read: streetable) turbo, with a widebody kit, and some deep dish rims. And that doesn't have to cost you 35k either. I'd imagine you could do that for about 20k.

It really depends on what your goals are, and how many people you know that have the skills to do what you need done.

 

That's the 3rd time I've been left out of you guys' lists. Somebody must hate Delaware people or something...

 

dude!, you have to copy and paste and add yourself

I'll do it for you this time lol

1) Crash Test Joey
2) Falnfenix
3) RX-Midget
4) x0ny
5) eage8
6) Coke!!!
7) DarkAngelKamui
8) f1bluerx7 - Mike
9) Shannon + Gabe
10) NeptuneRX (woot for sunday meets!)
11) Enkidu + his FC (hopefully nothing happens!)
12) 70% chance of Tofuball
12.9) Icesickkle (The guy always wearing the AUDI hat)
14) 71% chance of SGOF
15) Eightman1977 + SE (FC's on the drawnin board)
16) suds (joey, can you just put my name on the next one for me? )
17) MakoDHardie

 

oh ****! my bad! I haven't been on the forum in too long. I guess I'm rusty with the comms procedures now that I'm looking for meets this spring. Sorry guys!

Car's in the paint booth now getting the engine bay and jams sprayed.

 

mann, i hope my license doesnt get taken away by this drinking citation >.<