Johnny Boost

Grr stupid Forum I tried posting and it deleted... hmmm
Well I said I tore my engine apart today and It's looking good... well better than expected.

It looks like I will have to replace at least the front bearing and corner seals. and possibly the Front Stationary gear and seal springs. Plus Gaskets of course.
So far I haven't found and damage to the rotors or the rotor housings and I'm looking hopeful!

Once I rebuild it I have two options... put it in my 79 LE and drive it around like before.... OR Sell the LE roller with out an engine and pull the 12A outta the GSL and put the 13B in there and drive that ugly thing... but I can make it look better.

Either way if everything comes together fast I'll get my car tuned up and I'm down for some Rotary Mayhem!

RX-7 Chris

iTrader: (19)

Hope you can get the car done in time. Do you have pics of both the cars?

Johnny Boost

I've got some of the Black LE but no quality ones of the Brown FB

RX-7 Chris

iTrader: (19)

It's been real quiet around here. Anyone around?

MichaelB145

I'm thinking of setting up one more RX7 / Supra meet in a few weeks. Who all is running that would try to make it? The Spring meet had only about 13 cars which was very disappointing.

RX-7 Chris

iTrader: (19)

It was very disappointing. I drove all the way up from the springs hoping to see a large group.

Tyler [S5 FC]

I'll be there.... as long as that GT40 is still there

Just kidding, I'll still come!

boostedfc3s

iTrader: (2)

We should be able to come down with both our FC's. Let me know when and where.

iani1.1

iTrader: (13)

i wasn't able to make it to the car show, the tranny was still out of the car. i can definitely make to another meet. that spring meet was disappointing i gotta say

has to be a weekend for me though like after 3pm

Obie2kenobe

New FD owner here I will be down for any of the meets as long as they aren't between M-F 8 to 5. Just keep me posted and I am goin to try and make that oct. 25th one but I have inventory at work . I should be able to sneak away for a lil bit or something though just tell em I had a slept in then had a dead battery and then got a flat.......

Obie

Johnny Boost

All I need to do is put in a new cap and rotor and put my 13B back in the car, put on my intake manifold and start breaking in my engine and I'll be able to meet up finally!

RX-7 Chris

iTrader: (19)

Welcome Odie2kenobe

Glad you are almost there JB.

ScrapFC

iTrader: (5)

Hey all,
I just moved to Fort Collins from Eureka, CA. I'm hoping to have my TII on the road any time now. I was an avid AutoX'er back in CA, but I'm not seeing anything in FoCo. Am I gonna have to go to Denver for racing, or is there something more local that I've overlooked? I also look forward to meeting the local rotorheads...

Obie2kenobe

Welcome ScrapFC...don't know anything besides bandimere I am sure that there is someone who knows of something else though...there is also a drifting club around here somewheres.

Johnny Boost

Hey Welcome.... there a few FCs that I know in FoCo. We meet up everynow and then.

As for racing there is Bandimer Quarter Mile Drag Strip down in Morrison (Denver) As for Auto X there do that in Denver too... used to do it in Loveland but not so much. The Colorado Allied Drift Club sometimes holds drift events in Greeley. But no tracks in the area... I think a small road coarse needs to open up in northern Colorado.

Once I get my FB finished up a few of us up here are gonna be meeting up in FoCo or Loveland. The more the merrier...

ScrapFC

iTrader: (5)

Obie2kenobe: Thanks for the welcome. I might take a pass or 2 at Bandimere just for the data, but drag racing really isn't my thing. I've thought about drift a time or 2, (Some of my AutoX buddies might think I'm a bit of a drifter lol) but I have a hard enough time buying tires for AutoX. I can't imagine going through a set every outing!
Johnny Boost: Thanks also for the welcome. I've seen a few FBs in the area, and I saw a white FC in Loveland when I was at Sonic. I heard that there was at least one FD owner in town as well. It's kind of weird: In Eureka, a town of ~30,000, I saw FCs all over the place. In FoCo, a town of over 100,000, I don't see many at all. Where's the rotary love?
When I looked online, I saw some old posts about local AutoX. Sorry to hear that it died. Was there not enough interest? Too much trouble getting sites? I agree that we need a small road course. Maybe even just a local AutoX club, if enough interest can be raised and a location secured.
I'm in the middle of putting my intake/rat's nest together at the moment. I keep finding more parts that have vanished somewhere between my garage in CA, my storage unit and here. (If you ever get the chance to build a TII across 5 states, DON'T! It completely sucks...) I keep thinking that I'm almost done, but at this point it will be done when it's done.
Once it's done, I'm totally into meets/cruises/mountain road runs/etc. In the meantime, I'll be happy to show up to meets if folks don't mind me bringing the scooter (Katana) instead.

Johnny Boost

There are three FCs in Loveland that I can think of. My buddy has a White S4 there's another white S4 but it has a black bra... never met that owner and there is a gray S4 rolling around as well.

In FoCo there Laural has two 1 Red GXL that she drives daily and a TurboII There is also a great kid named Will with a Blue Vert. There's also a Red vert rolling around.

There's a few FDs around there is a kid named Tom who's on his 2nd FD with a V8 Swap. There's also a white LS1 powered FD in Greeley. I know there's atleast two rotary powered FDs in FoCo... one grey with a slightly beat up body and a red one that's heavily modded.

Check out the CO Registry and you'll see who's where.

I'm down with a scooter Why'd you come to FoCo? School?

Johnny Boost

just a random quick update my engine is in! now I just gotta connect up the intake and exhaust, add oil and coolant and tune her up!

ScrapFC

iTrader: (5)

I checked the registry and I am encouraged! I guess I just haven't been around enough to see all the rotary goodness. I _did_ see two Shelby Cobra replicas and a Ferrari Testarossa in the last two days, as well as a bunch of Porsches. I am really liking this town!
I actually moved out here to move out here. My wife and I came out to visit her folks back in January and we decided on the spot that we had to move. She just got a job and I'm looking. Once I find work, we'll shop for a house and settle in.
BTW, congrats on the motor! I love the 1st gens...

Johnny Boost

You're a smart man! Moving to Fort Collins is a good choice. We've got loads of great roads to drive on with in mins of leaving town.

Also Fort Collins is a great town for renters. You can find great deals on places.

MichaelB145

If you want to see some sick rides....email me at MikeB@theringoftherockies.com and I will have you come down to our office!



For everyone who is needing a tune next spring....please PM me. I will be bringing in a Tuner next Spring and need to figure out how much interest we have!

Tyler [S5 FC]

Hey Zico, who are you on here, seeing as I hang out with you most I oughta know who you are on here!

MichaelB145

I don't think Zico is on the forum. We need to get him out of the 80's and get him online!

Tyler [S5 FC]

Actually he is, I found him. He's rotorbizle, but he only has like 40 posts or somethin real low like that... what a noob!!!!

Johnny Boost

Hey I'm finished with my rebuild and just took the SA for a spin around the block! Now just have to fully break it in! So anytime yall plan on meeting up my car and I are ready.