If anyone is extremely bored tomorrow, you can come by The Dyno Edge at 315-D Juan-Tabo N.E. and see how few hp a 90 GTUs makes. I'll be up there at 1pm for a couple pulls to get a baseline before installing an Autronic ecu. If anyone else wants to run a couple pulls they said they had the time to run a few more cars, if so give em a call at 505-299-3313.

Wyatt

 

when youre done with that...come on down to Rotary RX....tom can get you more horses!!

 

I would be interested to see how much they make stock. You should post your results.

 

LOL. sick post your numbers. but for real tom will make that 7 fly. he made my 7 very happy.

 

LOL. sick post your numbers. but for real tom will make that 7 fly. he made my 7 very happy.

 

stupid cell phone double posting!! my cell phone works for posting some times.

any way some of us are going down to the drag strip tonight around 8 or 9

 

Well, there was a 3rd gen there, but I didn't meet the owner (those 3gens, so snobby to they're elders). Anyway it dynoed 136rwhp 110ft/lbs SAE (rb street headers/pre silence, exhaust and apex intake).

When I got home I found that the 1 rotor 6port is stuck open, It also started going very rich at 5.5k rpm. Still not too bad for a car that ran at least 20 min a 0 psi oil pressure at sevenstock seven (lost an oil cooler hose, 5min at 65+ on the 405 then 15+ min on surface streets before I found some oil).

I think I'll fix the 6 port and try again in late june when I go back to tune my supra.

 

sick. I wanted to see that dino but nothing worked out right that night. I wasted a lot of gas driving all over town and I never made it to the track. . maby next weekend. that and I wanted to run my car. I was told that it was bracket racing only. no street cars.