Your local Rotary shop
Thread Starter
***Moderator***
Joined: Feb 2001
Posts: 2,413
Likes: 0
From: Chicago
Your local Rotary shop
Post the rotary shop for your area that you have good experience with only. If you have question to ask post on some other threads.
please just put down like this format.
name:
address:
contact number/email:
description of your visit.
please just put down like this format.
name:
address:
contact number/email:
description of your visit.
Last edited by neo_omega; Sep 12, 2002 at 04:01 PM.
DoO user
Joined: Feb 2001
Posts: 177
Likes: 0
From: Almost but not quite, way down South!
COLORADO SHOPS
RPM (AKA Mazda-Honda shop): 303-771-1500
-Skinny: 1st and 2nd gen specialist. Can work on FD's. Racing Beat parts dealer, WOLF3DEMS dealer. Also believe HKS/Greddy.
Rotary Specialists: http://www.rotaryspecialists.com/
2190 South Raritan
Englewood, Colorado 80110
303-937-7772
-Skinny: 1st gen specialists. Does work on FC and FD's. SCCA Spec7 race-car builders and rentals.
Also TR-Rotorsports. Run by Tony Rivera. He only works on SCCA race cars, not street cars. Contact RPM for more information.
Mazda Parts:
Gateway Mazda
http://www.gatewaymazda.com/
Gateway Mazda
90 Havana Street
Aurora, CO 80010
Phone: (303) 344-5800
For parts, ask for Steve Piechetti
-Skinny: 1st and 2nd gen specialist. Can work on FD's. Racing Beat parts dealer, WOLF3DEMS dealer. Also believe HKS/Greddy.
Rotary Specialists: http://www.rotaryspecialists.com/
2190 South Raritan
Englewood, Colorado 80110
303-937-7772
-Skinny: 1st gen specialists. Does work on FC and FD's. SCCA Spec7 race-car builders and rentals.
Also TR-Rotorsports. Run by Tony Rivera. He only works on SCCA race cars, not street cars. Contact RPM for more information.
Mazda Parts:
Gateway Mazda
http://www.gatewaymazda.com/
Gateway Mazda
90 Havana Street
Aurora, CO 80010
Phone: (303) 344-5800
For parts, ask for Steve Piechetti
Persona non grata
Joined: Feb 2001
Posts: 2,487
Likes: 17
From: Ballwin, MO
Shop name: Rotary Doctor
Location: Neosho, MO
Owner: Kyle Seaman
Phone: (417) 451-9661
Description: Small one mechanic shop with a good selection of parts cars. Kyle is one of the most knowledgable guys I've ever known. He has every nut and bolt memorized on RX-7's. Not to big on doing extensive modifications. But builds good motors, and does excellent repair work. He's a good guy that's supported rotaries since the early 70's. He deserves your support if you live in SW Missouri.
Location: Neosho, MO
Owner: Kyle Seaman
Phone: (417) 451-9661
Description: Small one mechanic shop with a good selection of parts cars. Kyle is one of the most knowledgable guys I've ever known. He has every nut and bolt memorized on RX-7's. Not to big on doing extensive modifications. But builds good motors, and does excellent repair work. He's a good guy that's supported rotaries since the early 70's. He deserves your support if you live in SW Missouri.
Registered User
Joined: Dec 2001
Posts: 428
Likes: 0
From: Chicago
http://www.a-spectuning.com/
A-Spec
533 Lunt Ave
Schaumburg, IL 60193
(630) 825-0333 [Office]
2nd/3rd gen specialists carrying all major aftermarket brands...with over 3200 sq ft shop space...develops its own boost controller and single turbo kits...
A-Spec
533 Lunt Ave
Schaumburg, IL 60193
(630) 825-0333 [Office]
2nd/3rd gen specialists carrying all major aftermarket brands...with over 3200 sq ft shop space...develops its own boost controller and single turbo kits...
Last edited by neo_omega; Aug 15, 2007 at 03:20 PM.
Full Member
Joined: Sep 2001
Posts: 101
Likes: 0
From: Indianapolis
AIM - Advanced Import Motorsports
Gasoline Alley
Indianapolis, IN
(317) 381-0898
http://www.aimtuning.com/
*** edited by BOOSTD 7 to include more info ***
Gasoline Alley
Indianapolis, IN
(317) 381-0898
http://www.aimtuning.com/
*** edited by BOOSTD 7 to include more info ***
Round&Round not Up&Down
Joined: Aug 2001
Posts: 2,805
Likes: 0
From: West Bloomfield, MI
SE Michigan
Shop name: Banzai Racing
Lacation: Monroe, MI
Owner: Chris Sanders
Email: chrissanders@netzero.com
Shop phone: Don't bother, he doesn't answer, too busy wrenchin'
~~~~~~~~~~~~~
Description: One mechanic shop with extensive knowledge of 1st, 2nd & 3rd gens. MANY 2nd gen parts on hand. He does it all, from diagnosing problems to performance upgrades.
Lacation: Monroe, MI
Owner: Chris Sanders
Email: chrissanders@netzero.com
Shop phone: Don't bother, he doesn't answer, too busy wrenchin'
~~~~~~~~~~~~~
Description: One mechanic shop with extensive knowledge of 1st, 2nd & 3rd gens. MANY 2nd gen parts on hand. He does it all, from diagnosing problems to performance upgrades.
Trending Topics
Rock Star.... almost
Joined: Apr 2001
Posts: 68
Likes: 0
From: Cincinasty
In cincinnati: International Performance Motorworks does really nice work and (as unbelievable as it sounds) King's Mazda has a guy that knows how to work on 7's *Wow* He's done some stuff for me before...
In Columbus: Passen Motorsports... The guy there that does most(all) the rx7 work is named JJ and he's excellent with 7's as well... all the guys there are cool as hell too...
In Columbus: Passen Motorsports... The guy there that does most(all) the rx7 work is named JJ and he's excellent with 7's as well... all the guys there are cool as hell too...
Banned
Joined: Jul 2001
Posts: 2,519
Likes: 2
From: Rochester, MI
I don't necessarily have a shop, but there is a guy in Muskegon that works at My Auto Import Center named Steve Dewitt....he went to school for three years just on the Rx7....he's great. And he even takes beer as payment...LOL.
Full Member
Joined: Aug 2001
Posts: 61
Likes: 0
I have to back Boost 7's pick for the Rotary Doctor. One of the most knowledgeable rotary guys out there and extremely fairly priced. He's usually very busy (as any good rotary mechanic should be) but is one of two or three people I'd let touch my FD in this state.
-Andy
-Andy
Rotary Enthusiast
Joined: Nov 2001
Posts: 775
Likes: 0
From: Springfield , mo
The rotary doctor is the best around here. I've a got a 12a form it i've got almost 20k on it and it runs so good. And it was a good price and he was so easy and offers such a good warranty. there is just not enough room for me to rant about what this man can do. If you need anything to reinforce this take a ride in my 1st gen. I'm not to sure what has been done to the motor but it can put alot more cars in thier place than most 1st gens.
jr
jr
Rotary Enthusiast
Joined: Oct 2002
Posts: 806
Likes: 0
From: fly over state
here is another huge thumbs up for Aim tuning in Indianapolis. Shane and the guys do a fantastic job. BTW he has M2 downpipes in stock.
http://aimtuning.com
http://aimtuning.com
Lives on the Forum
Joined: Sep 2001
Posts: 6,131
Likes: 2
From: IN
Shane Benson
AIM Tuning
298 F Gasoline Alley
Indianapolis IN 46222
317-381-0898.
Shane will need to work on parking strategy for visitors, as one of his buddies, Jorge Sanchez, hit my parked car while Jorge was backing out. Jorge has promised to pay for damages, but so far has NOT returned my calls/pages after I've provided the estimate for the repairs?
AIM Tuning
298 F Gasoline Alley
Indianapolis IN 46222
317-381-0898.
Shane will need to work on parking strategy for visitors, as one of his buddies, Jorge Sanchez, hit my parked car while Jorge was backing out. Jorge has promised to pay for damages, but so far has NOT returned my calls/pages after I've provided the estimate for the repairs?
Last edited by SleepR1; Dec 22, 2002 at 12:48 AM.
Senior Member
Joined: Dec 2001
Posts: 445
Likes: 0
From: Topeka, KS
Prather Racing
5422 SW 93rd St
Topeka/Wakarusa KS
785-836-2265
Owners are SCCA racers, Kent 3 time national champ in his MG, son Jesse races a first gen. They are RB dealers and can do ANYTHING (dont know about the FD though) they mainly deal with 1st and 2nd gens. Can build any rotary motor, stock, streetported or bridge.
http://www.networksplus.net/kprather/index.html
5422 SW 93rd St
Topeka/Wakarusa KS
785-836-2265
Owners are SCCA racers, Kent 3 time national champ in his MG, son Jesse races a first gen. They are RB dealers and can do ANYTHING (dont know about the FD though) they mainly deal with 1st and 2nd gens. Can build any rotary motor, stock, streetported or bridge.
http://www.networksplus.net/kprather/index.html
RX7 Store / Advanced Imports
3500 Millikin Dr
Suite F
Columbus OH 43228
614-771-8966
Large selection of aftermarket parts, installs/Service on 2nd and 3rd Gen RX-7's and Dyno tuning
3500 Millikin Dr
Suite F
Columbus OH 43228
614-771-8966
Large selection of aftermarket parts, installs/Service on 2nd and 3rd Gen RX-7's and Dyno tuning
Lives on the Forum
Joined: Sep 2001
Posts: 6,131
Likes: 2
From: IN
Newbie
Joined: Apr 2003
Posts: 2
Likes: 0
From: Bloomington, IN
Originally posted by rxguru
J&H Racing
1700B N. Packinghouse Rd.
Bloomington, IN
812-334-4119
This dude built the most bad *** 12a for my GS and it didn't cost me an arm and a leg!
J&H Racing
1700B N. Packinghouse Rd.
Bloomington, IN
812-334-4119
This dude built the most bad *** 12a for my GS and it didn't cost me an arm and a leg!
Rotary Enthusiast
Joined: Jan 2002
Posts: 845
Likes: 38
From: Oscoda, MI
Cambrian Mazda
460 Pim Street, Suite 2
Sault Ste. Marie, ON P6B 2V2
Phone: 942-3999
Fax: 759-3081
Email: cambrian.mazda@on.aibn.com
Good dealership with Rotary Trained mechanic. Had my 1988 FC serviced there more than once. Good people. I lived in Sault Ste. Marie, MI, so it was just a short drive away. Recommended for anyone who owns a RX7 in Northern MI.
460 Pim Street, Suite 2
Sault Ste. Marie, ON P6B 2V2
Phone: 942-3999
Fax: 759-3081
Email: cambrian.mazda@on.aibn.com
Good dealership with Rotary Trained mechanic. Had my 1988 FC serviced there more than once. Good people. I lived in Sault Ste. Marie, MI, so it was just a short drive away. Recommended for anyone who owns a RX7 in Northern MI.
Full Member
Joined: Feb 2003
Posts: 81
Likes: 1
From: KIRKWOOD,MO
Exclusive Performance
specializing in everyday, classic & exotic cars
Performance Work & Detailing
ASE certified
about 15 years exp.
does very good work on RX-7's. they love them, even have some. bridge port, street port, you name it they can do it. all in house.
phone # (314) 484-9050 E.J.
(314) 359-9902 Mitch
location: 1008 S.Benton in St.Charles, MO right off 5th street
the BEST prices i have found in the St.Louis area. haven't found any cheaper for the quality.
A+++++++++ shop
specializing in everyday, classic & exotic cars
Performance Work & Detailing
ASE certified
about 15 years exp.
does very good work on RX-7's. they love them, even have some. bridge port, street port, you name it they can do it. all in house.
phone # (314) 484-9050 E.J.
(314) 359-9902 Mitch
location: 1008 S.Benton in St.Charles, MO right off 5th street
the BEST prices i have found in the St.Louis area. haven't found any cheaper for the quality.
A+++++++++ shop
Last edited by portwarboss; Jul 30, 2003 at 03:44 PM.
Senior Member
Joined: Jul 2003
Posts: 441
Likes: 0
From: chicago
Re: SE Michigan
he's the best i've found and his prices are awsome, and best of all, is he know all about rx7s. he has moved to indaina and well worth the trip.
Originally posted by jimmyv13
Shop name: Banzai Racing
Lacation: Monroe, MI
Owner: Chris Sanders
Email: chrissanders@netzero.com
Shop phone: Don't bother, he doesn't answer, too busy wrenchin'
~~~~~~~~~~~~~
Description: One mechanic shop with extensive knowledge of 1st, 2nd & 3rd gens. MANY 2nd gen parts on hand. He does it all, from diagnosing problems to performance upgrades.
Shop name: Banzai Racing
Lacation: Monroe, MI
Owner: Chris Sanders
Email: chrissanders@netzero.com
Shop phone: Don't bother, he doesn't answer, too busy wrenchin'
~~~~~~~~~~~~~
Description: One mechanic shop with extensive knowledge of 1st, 2nd & 3rd gens. MANY 2nd gen parts on hand. He does it all, from diagnosing problems to performance upgrades.
