View Poll Results: If there a new Minnesota Club,would you be a part of it?
Voters: 55. You may not vote on this poll
Minnesota 7s
06-09-09, 11:33 AM
#151
Tonic
Join Date: Apr 2008
Location: St. Paul Minnesota
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Weak huh, lol. i wasn't gonna waste my time, 30 min of my time is long enough. haha. plus i was there and got bored of waiting. Well anyways you should come down to our shop in burnsville and checkout the seven's we have here. Always willing to appreciate another person who actually went to the meet even in the rain. lmao. the only thing that sucked was my windows kept fogging up cause i don't have heat. lol.
Weak sos! I was there at 3:30 till 4:45, but nobody showed up! Andy and I talked a bit, but geez, a little rain scared you all off? Man, I was hoping to see at least ONE other RX!
On side note... holy crap those VW's water pumps are tiny! I couldn't believe that size of a 1.8T's pump, it was smaller than my fist! Andy had a good laugh when I saw that.
On side note... holy crap those VW's water pumps are tiny! I couldn't believe that size of a 1.8T's pump, it was smaller than my fist! Andy had a good laugh when I saw that.
06-10-09, 10:36 PM
#152
One more time...
iTrader: (2)
Join Date: Nov 2008
Location: Minnesota
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
I waited for a long time because I had plans after the meet was going to be up, and the guy I was meeting with couldn't get off of work any earlier.
I bet that you were driving away as I was arriving. That sucks so bad it's not even funny.
Where's your shop? I'm going to have to stop by one of these days!
I bet that you were driving away as I was arriving. That sucks so bad it's not even funny.
Where's your shop? I'm going to have to stop by one of these days!
06-14-09, 09:48 PM
#155
Fighting Global Cooling
Thread Starter
iTrader: (6)
Join Date: Mar 2009
Location: Minneapolis, Minnesota
Posts: 983
Likes: 0
Received 0 Likes
on
0 Posts
Same here, My motor should be done wednesday if all goes according to plan and then ill pray some and fire it up! haha. Lookin forward to a meet in the near future?
06-25-09, 08:03 AM
#158
Senior Member
iTrader: (1)
Join Date: Mar 2005
Location: Fargo, doncha know
Posts: 503
Likes: 0
Received 0 Likes
on
0 Posts
we have 7 FD's that are going to meet at MA Performance on Aug 1st. Steve Kan is coming up to tune some cars. Maybe we could get together that night or something. Or just come out and watch some rx7's get tuned.
06-26-09, 09:01 PM
#160
Fighting Global Cooling
Thread Starter
iTrader: (6)
Join Date: Mar 2009
Location: Minneapolis, Minnesota
Posts: 983
Likes: 0
Received 0 Likes
on
0 Posts
Providing I have completed the second rebuild attempt on my motor and it starts this time I'll defiantly check it out since i live a block away from MA lol
06-30-09, 11:34 AM
#161
Junior Member
![GoldenRexasaurus[fc]'s Avatar](data:image/svg+xml;utf8,<svg xmlns='http://www.w3.org/2000/svg' viewBox='0 0 50 50'><circle class='avatar-circle-default' fill='%23abb678' cx='25px' cy='25px' r='20px'></circle><text class='avatar-text-default' x='49%' y='53%' fill='white' text-anchor='middle' alignment-baseline='middle'>G</text></svg>)
Join Date: Apr 2006
Location: Twin Cities, MN
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
hey DangerousFC3s so this is your shop?
Im trying to look for other shops that specialize or have experience in rx7s/rotaries
Do you guys know of any other shops?
I have a FC that I need to restore, had issues with it and I stopped working on it a year ago
It would be kool to meetup if I could get this thing working
My cousin drives a FD as well but hes usually busy with work and school
Im trying to look for other shops that specialize or have experience in rx7s/rotaries
Do you guys know of any other shops?
I have a FC that I need to restore, had issues with it and I stopped working on it a year ago
It would be kool to meetup if I could get this thing working
My cousin drives a FD as well but hes usually busy with work and school
07-01-09, 11:13 PM
#162
Tonic
Join Date: Apr 2008
Location: St. Paul Minnesota
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
651gyx88: hey bro, you can stop by anytime of day. we are trying to make a new home for rx7's and one that is located in the upper midwest. well stop by the shop tommorrow or sometime this week. Any rx7 is welcomed, believe me i seen worse and put together nice ones. between the hours of 10 to 6:30 is when you should stop by, we're not officially open but you got questions we can help or you can check everything out. Speaking of fd's i been noticing one thats been driving around the south suburbs. stock looking and silver who are you, been trying to flag you down. my fc, is being ripped apart right now getting rid of a bunch of vacuum lines and getting a cleaner look underneath the hood. all done by me. We are located in burnsville on cliff rd. and 12th ave. warehouse district, by the burnsville bowling alley and next door to lee ann chin distributers. come to the back and you will usually see a trailer and bmw and a mudtruck back there. believe me i understand the feeling of letting someone else touch your car, but like i said come check us out. you'll see the outcome of each car when we are done with it. it all depends on how deep your pockets can take you.
07-03-09, 09:56 PM
#164
Tonic
Join Date: Apr 2008
Location: St. Paul Minnesota
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
1203 cliff rd. east.
burnsville, mn 55337
yeah man any of you guys are welcomed,By the way my name is Tonic. just like gin and tonic the drink. i am the asian guy, also have my buddy delray who is the master mechanic for rotarys, which everything under the hood we take care of. If you guys know where burnsville bowl is then its real easy to find we are on the same street basically on the corner right next door to lee ann chin. we might not be there this weekend due to the 4th but next week, just come on by.
burnsville, mn 55337
yeah man any of you guys are welcomed,By the way my name is Tonic. just like gin and tonic the drink. i am the asian guy, also have my buddy delray who is the master mechanic for rotarys, which everything under the hood we take care of. If you guys know where burnsville bowl is then its real easy to find we are on the same street basically on the corner right next door to lee ann chin. we might not be there this weekend due to the 4th but next week, just come on by.
07-13-09, 10:26 AM
#167
Tonic
Join Date: Apr 2008
Location: St. Paul Minnesota
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
any of you local guys have a turbo 2 motor sitting around, need a s5 motor running or blown. need front and back plates off it. please it can help alot. willing to buy or exchange for service. or if you need any prts willing to trade.
10-14-09, 08:28 PM
#169
The Ninja
Join Date: Mar 2007
Location: Thunder Bay, Ontario
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
Thought I'd check in. Don't live in Minnesota, but in Thunder Bay, Ontario about 30 minutes from the border. . . not too many 7s in this neighborhood. I drive a vintage red '94 R2.
10-16-09, 12:29 AM
#170
Newbie
iTrader: (4)
Join Date: Oct 2009
Location: Minnesota
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
New to the forum from MN...Hey Ken...I haven't met you before but reading some old post here and finding out that you were brothers with ed....i went over to your brother shop in blaine and purchased some old fd parts from him...
11-05-11, 12:38 PM
#174
shut up you jack wagon
yes.I usto have a red fc base model that had a t2 swap and sold.and got a gslse..i live in new hope....iv seen your car numeros of time's...clean gsl you live on hwy 55 i saw you car whene it had the stock wheel's....... i almost knocked on your door to see if you wanted to sell....