I have a mazda rx7 Fd. The engine,trans an a few more parts need to be put in and get these beautyfull machine running I have been waiting for a few people to do the job for me but nothing yet. Is there anyone in the Chicago area that can help me with this???? R can refer me to someone that can

 

http://shookmotorsports.com/

 

http://shookmotorsports.com/

 

Dude, I've done the work on my own FD. Are you wanting them to do it or are you wanting help doing it?

 

Its not that hard

 

Send me a pm, if you haven't already got this running.

 

^ Wanna come help me troubleshoot mine? Not able to start it ever since the September cruise, I think one of the rotor has low compression

 

If any of you guys get together to put in some work, let me know. I don't have any rotory experience but it would be nice to gain some knowledge.

 

Did some work but the engine was no good bad compression so now I'm trying to get this money so I can take the car to A-spec tunning I want to get the car running soon n have spent a really good amount of money on parts but going to keep me head up on this , engine rebuilt n need a few more minors parts to get the car back to 100 percent I will post some pics tomorrow.

 

Has the engine been sitting long? It may just be carbon locked.

 

Throw some ATF in through the spark plug holes and crank her over. I had to do that to get my seals to unstick after the car sat for a year. It was only running on one rotor and after the ATF the compression went back up to normal and ran fine.

 

itll never run right, trade it to me :P

 

Yeah the engine been sitting for long time. I Stay by Montrose and Polaski area in Chicago Illinois if thers someone around to give me a hand i would appreciate it. :-)

 

any updates?

 

 

 

 

 

 

Those r the pics hope ya like I am looking for some parts but first thing is get the car running to 100 percent

 

Damn got some bad *** news from the shop getting this baby done right I'm going to put 6g into the car just to get it running thanks to my job n Aspec tunning will b getting the job done for me.

 

So this is where we are at right now I got some money to build my car back up but Insted I gave it to my brother so he can buy this bad *** rx8 here r some pics, so I'll be getting a front clip so I don't have to be buying to many parts for the car from tiguere Japan n do the work my self. So any advice on how to go on this would be cool