Microtech Want to buy MicroTech
05-16-13, 06:56 PM
#1
Junior Member
Thread Starter
Join Date: Dec 2012
Location: Pasadena, CA
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Want to buy MicroTech
Hey everyone! Im looking to learn how to tune, and was hoping to find a used MicroTech to learn on that i could buy, please help if you have one I could buy.
I am located in LA, my budget is around $400, please help.
Thank you !
I am located in LA, my budget is around $400, please help.
Thank you !
05-18-13, 10:30 AM
#2
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
Take my advice and pick a different ECU to learn with! The Microtech is so limited that you will be doing yourself a disservice using one as an example. You may be able to find a used Haltech within that budget, but if you really want to learn, then it's hard to beat a MegaSquirt.
05-19-13, 10:04 AM
#4
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
One could say I have a little experience with MegaSquirt.
MegaSquirt is a line of ECUs, ranging up all the way from a built it yourself kit to fully assembled units. You can choose how much involvement you want in building the ECU. You can start with a kit and assemble everything, or you can buy an MS1/MS2 pre-assembled with only requires modding to work on the rotary. or you can buy a fully assembled MS3X where the only ECU changes needed to run a rotary are to set some jumpers. And multiple combinations in between. Or for the persom who wants the whole package, there's the MS3-Pro which is much like any other ECU on the market: fully assembled, comes with a flying lead harness ready to be wired into the vehicle.
There's loads of info on running MegaSquirt on a rotary out there. Here's a few links to get you started:
How to MegaSquirt your FC RX-7
How To Megasquirt Your 2nd Gen RX-7
MegaSquirt is a line of ECUs, ranging up all the way from a built it yourself kit to fully assembled units. You can choose how much involvement you want in building the ECU. You can start with a kit and assemble everything, or you can buy an MS1/MS2 pre-assembled with only requires modding to work on the rotary. or you can buy a fully assembled MS3X where the only ECU changes needed to run a rotary are to set some jumpers. And multiple combinations in between. Or for the persom who wants the whole package, there's the MS3-Pro which is much like any other ECU on the market: fully assembled, comes with a flying lead harness ready to be wired into the vehicle.
There's loads of info on running MegaSquirt on a rotary out there. Here's a few links to get you started:
How to MegaSquirt your FC RX-7
How To Megasquirt Your 2nd Gen RX-7
Thread
Thread Starter
Forum
Replies
Last Post
SakeBomb Garage
Group Buy & Product Dev. FD RX-7
8
10-09-15 10:05 PM
mulcryant
2nd Generation Specific (1986-1992)
10
09-09-15 05:24 PM
