Microtech Still a b*stard to start...
#1
Spinner
Thread Starter
Still a b*stard to start...
Whenever the engine is first starting or cools down; the engine freaks out at idle when started and wants to idle rough. Then will rapidly lean till engine shutoff. If I rev it during this time it cuts out. But if I solidly rev to 3.5k and hold for a minute the engine calms and is perfect... I have the cold setting turned up, the water temp richened on cold, af ste rich, cant think of what other setting I can fidle with to help me out. Anyone know any tricks?
thanks everyone
thanks everyone
#2
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
Sounds like your cold start maps need to be tuned. The warmup enrichment map (%_wat? I can't remember what it's called off hand) needs to be adjusted after your main load map is close enough. It should be a smooth progression down the graph from cold to hot.
Thread
Thread Starter
Forum
Replies
Last Post
Bigretardhead
2nd Generation Specific (1986-1992)
10
06-22-04 01:32 PM