Microtech Runtime error 13!"#¤&"

Reply Subscribe

Thread Tools

Search this Thread

Mar 1, 2007 | 06:09 AM

Vegard

Thread Starter

Junior Member

Joined: Jun 2006

Posts: 38

Likes: 0

From: Norway

Runtime error 13!"#¤&"

Well as the topic says I get runtime error 13 when I try connecting to the microtech... lt10s with x4 if that matters..

I have the dongle connected, usb adapter and all that, and this was working before i formated the computer...

Im using the software from the CD that I got with the dongle, and I've tried the software on the official site.

Also I can't change the com port settings for some reason in the Device Manager?!
Both com3 and com4 get the "runtime error 13" (com 3 and 4 is the com is sets to when I plug it in the USB)

Any help?

https://www.rx7club.com/attachment.p...d=224659&stc=1

Attached Thumbnails

Mar 1, 2007 | 06:23 AM

Vegard

Thread Starter

Junior Member

Joined: Jun 2006

Posts: 38

Likes: 0

From: Norway

Im trying this now:

Quote:

Originally Posted by projectredsuns

Ok this is info needs to be stickied. But I will say it again. If you use a 9-pin usb adapter. You need to uninstall microtech, uninstall all your 9pin-usb drivers/software. And start fresh. Install the usb adapter configure it to port 1. Restart the machine. Reinstall microtech and it should work just fine.

will get back to you with result...

Mar 1, 2007 | 06:54 AM

Vegard

Thread Starter

Junior Member

Joined: Jun 2006

Posts: 38

Likes: 0

From: Norway

No go so far... same problem "runtime error 13"

Mar 2, 2007 | 05:33 AM

Vegard

Thread Starter

Junior Member

Joined: Jun 2006

Posts: 38

Likes: 0

From: Norway

Quote:

Originally Posted by teachermechanic

microtech
Hi, just change you computer language.
Pass one year i had same problem.

I got this in a pm, and it worked!

I changed all my regional and time settings to United States, and it worked...

Thanks for the help teachermechanic!

Vegard

Mar 2, 2007 | 08:03 PM

RotaryBuddha

CURVE OF CONSTANT WIDTH

iTrader: (4)

Joined: Mar 2004

Posts: 2,314

Likes: 1

From: Wesley Chapel, FL

wow thats weird that the microtech program needed to be set for a different region to work correctly.

glad you got it working

Mar 3, 2007 | 07:18 AM

teachermechanic

Senior Member

iTrader: (4)

Joined: Oct 2002

Posts: 513

Likes: 1

From: east Québec

Quote:

Originally Posted by Vegard

I got this in a pm, and it worked!

I changed all my regional and time settings to United States, and it worked...

Thanks for the help teachermechanic!

Vegard

No problem, i don't understand why it's not sticky.