|
Runtime error 13!"#¤&"
1 Attachment(s)
Well as the topic says I get runtime error 13 when I try connecting to the microtech... lt10s with x4 if that matters..
I have the dongle connected, usb adapter and all that, and this was working before i formated the computer... Im using the software from the CD that I got with the dongle, and I've tried the software on the official site. Also I can't change the com port settings for some reason in the Device Manager?! Both com3 and com4 get the "runtime error 13" (com 3 and 4 is the com is sets to when I plug it in the USB) Any help? https://www.rx7club.com/attachment.p...d=224659&stc=1 |
Im trying this now:
Originally Posted by projectredsuns
Ok this is info needs to be stickied. But I will say it again. If you use a 9-pin usb adapter. You need to uninstall microtech, uninstall all your 9pin-usb drivers/software. And start fresh. Install the usb adapter configure it to port 1. Restart the machine. Reinstall microtech and it should work just fine.
|
No go so far... same problem "runtime error 13"
|
Originally Posted by teachermechanic
microtech
Hi, just change you computer language. Pass one year i had same problem. I changed all my regional and time settings to United States, and it worked... Thanks for the help teachermechanic! Vegard |
wow thats weird that the microtech program needed to be set for a different region to work correctly.
glad you got it working :) |
Originally Posted by Vegard
I got this in a pm, and it worked!
I changed all my regional and time settings to United States, and it worked... Thanks for the help teachermechanic! Vegard |
| All times are GMT -5. The time now is 01:42 AM. |
© 2024 MH Sub I, LLC dba Internet Brands