Microtech reflasing ltx-12s
01-08-13, 10:39 PM
#1
Full Member
Thread Starter
Join Date: Dec 2012
Location: Chicago
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
reflasing ltx-12s
New fc owner here, i have an ltx-12s thats supposed to be setup for an fd, n need it to reflash it to work with my fc, is there any other place besides the factory? They are on vacation till the 21st n i want my car now! Thanks for any help
01-09-13, 11:06 AM
#2
Junior Member
Join Date: Oct 2011
Location: Netherlands
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Not sure if you can apply the same lt10 change in your case.
Here is what they inform me by changing the static car shall run on the lt10-x4
microtechefi.com • View topic - LT10S & X4 13b question
Here is what they inform me by changing the static car shall run on the lt10-x4
microtechefi.com • View topic - LT10S & X4 13b question
01-13-13, 10:29 AM
#5
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
Only the factory and some dealers can flash the ECUs at the moment.
The crank triggers are the same, so if you use FD coils and sensors then you can use the ECU as is.
The crank triggers are the same, so if you use FD coils and sensors then you can use the ECU as is.
01-19-13, 04:09 PM
#6
Full Member
Thread Starter
Join Date: Dec 2012
Location: Chicago
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Going to trade my awesome rotary tech for one(for fc). But in case that wasnt an option, you say fd ignition coils(the ones that connect to spark plugs) and crank angle sensor(s?) would get it running? Thanks
Thread
Thread Starter
Forum
Replies
Last Post