Microtech o2 sensor data?
01-19-12, 11:20 PM
#1
Junior Member
Thread Starter
Join Date: Jan 2012
Location: wichita, ks
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
o2 sensor data?
i have a lt-10 microtech on a 86 rx7, i have the o2 sensor hooked up but my software shows 19.0 afr. How do i fix this? Is there a calibration or does anyone know what sensor replaces it?
Thanks
Thanks
01-21-12, 10:22 AM
#2
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
Is your LT10s set up for a wideband input, or narrow band?
The stock OEM sensor is just a generic one wire sensor. Just walk into an auto parts store and ask for the cheapest 1 wire O2 sensor, from a Chevette or something.
It is of limited use for tuning.
The stock OEM sensor is just a generic one wire sensor. Just walk into an auto parts store and ask for the cheapest 1 wire O2 sensor, from a Chevette or something.
It is of limited use for tuning.
03-01-12, 07:30 PM
#3
Ive got the same man if ur not running a wideband on the car ur lt10 will read 19.0.. Ive been lookin into some wideband kits justso pricey tho anyone got any suggestions on any
03-01-12, 09:02 PM
#4
F-IT
iTrader: (5)
Join Date: Jun 2006
Location: ocala,fl
Posts: 995
Likes: 0
Received 0 Likes
on
0 Posts
Your ecu has to be config to use a wideband, its not one or the other. Its really useless to use the single wire anyways seeing how the microtechs don't support any type of closed loop.
Thread
Thread Starter
Forum
Replies
Last Post
rotor_veux
2nd Generation Specific (1986-1992)
7
09-19-15 07:13 PM
mulcryant
2nd Generation Specific (1986-1992)
10
09-09-15 05:24 PM
