Microtech lt9 cranking issue
#1
Full Member
Thread Starter
Join Date: Jul 2009
Location: NJ
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
Microtech lt9 cranking issue
Hey guys maybe someone can guide me to resolve this issue. Since I purchased my Repu it has been running great until a couple of days ago..Went to turn it on and it cranks but doesn't start. Everything seems ok with spark, fuel pressure and ecu has both red and yellow light flashing.Ran the test on the injector and they seem ok. When I pure gas through the Webers it starts and shuts off when gas runs out. Connected laptop to the ECU and this is the log I get during cranking. Do you see something that's missing from the log? I feel like it's a wire or something that's not telling the injector to fire.
https://cimg6.ibsrv.net/gimg/www.rx7...d65c687cf0.jpg
https://cimg6.ibsrv.net/gimg/www.rx7...d65c687cf0.jpg
Last edited by littlez187; 10-23-20 at 09:00 PM.
#2
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
Has the weather become much colder since the last time it ran?
Use a stethoscope or screwdriver held against the injector and your ear to confirm the injectors are firing while cranking.
Use a stethoscope or screwdriver held against the injector and your ear to confirm the injectors are firing while cranking.
Thread
Thread Starter
Forum
Replies
Last Post