RotorsRulePistonsDrool

I finally got my microtech wired in to my vw bug's cosmo 13b rotary engine and I went out and bought a 6 foot 9pin cord to go from the ecu to the computer. When I went to press f1 to initialize connection between the ecu and computer, nothing appears and all the values are at 0%. I decided to try and start the engine, got it started, nothing changed on the software values... Did I hook something up
wrong? Any help is appreciated!!!

BTW, I have the microtech lt10s with x4 box.

MaczPayne

iTrader: (5)

You need to purchase the laptop adapter in order to interface with a laptop computer. It's a black dongle that connects inline between the 9pin serial cable and the serial port on the computer.

http://trickshiftperformance.com.au/...ter1-600px.jpg

BLACK MAMBA

iTrader: (58)

thats correct, you will need the microtech dongle adapter.

RotorsRulePistonsDrool

What is a site for a reasonably priced dongle? BTW, I am in the states. thanks

MaczPayne

iTrader: (5)

You can get it from "Japan2LA" on this forum, he's an MT dealer I purchased mine from.

RotaryEvolution

iTrader: (30)

i also have a spare if you can't get a hold of him. they are rather pricey though, to keep in mind, mainly because the adapter is what saves the maps.

RotorsRulePistonsDrool

How much do you want for the dongle karack?