Microtech Area is for discussing Microtech systems

Microtech Microtech Help...

Old 02-10-11, 08:17 PM
  #1  
Junior Member
Thread Starter
 
Join Date: Feb 2011
Location: Queens
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
Microtech Help...

Hey guys, I am new here and I need some help. I would have posted this in the Microtech section but this said "New Members Techincal" so I chose here. Also, not a lot of Supra guys use Microtech in the States and I know RX-7 guys use them, so I believe this would be the best place to get help.

I bought a 89 Supra with a 2JZ in it and it has a microtech LT12 standalone. The car was running but horribly and after adjusting the maps, I got a little better. My problem is that I am in NY and it is cold outside, 17F and the Supra refuses to start. When we push the car in the shop, leave it overnight, it will start the next morning but after being outside the whole day and getting cold, it won't start. I tried to look around for a base map because the owner said all the settings was changed when he got the car "tuned."

After my research, I found out that there is no "base map." There are a bunch of settings that you have to do. I also contacted Microtech and they said that they won't give me the settings to the base map and the only way for me to get it is to by the laptop adapter for $90.00. I also asked how do I load a map and the response I got was to look in the manual. I did and I found was something explaining to use "M" and "P" on the keyboard, so I am not to use on that.

The car runs geat under boost, hold an 11.5 but when it is cold, it misses, dumps fuel and stalls when starting for the first time. I tried pulling fuel on the maps when cold but that helped a little, not much. It went through $30 of regular in one day just idling. I don't know what the timing setting for static timing should be and if what is there is the correct setting right now. Basically, I want to return the ECU back to factory settings as much as possible.

My two questions are:

1) How do I load a map on the LT-12?

2) Does anyone have the 2JZ stock settings that I can use to get this car started? Basically, I want to return the ECU back to factory settings as much as possible.


Thanks.
IboughtASupra is offline  
Old 02-11-11, 04:32 AM
  #2  
Junior Member
Thread Starter
 
Join Date: Feb 2011
Location: Queens
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
18 views. Come on someone help me out.
IboughtASupra is offline  
Old 02-11-11, 05:00 AM
  #3  
brap brap brap
iTrader: (17)
 
Boriquaguerrero's Avatar
 
Join Date: Jul 2007
Location: Joint Base Lewis Mcchord, Washington
Posts: 958
Likes: 0
Received 14 Likes on 14 Posts
Boriquaguerrero is offline  
Old 02-11-11, 05:26 AM
  #4  
FD Project
iTrader: (58)
 
BLACK MAMBA's Avatar
 
Join Date: Apr 2009
Location: Palm Beach, FL
Posts: 2,353
Likes: 0
Received 1 Like on 1 Post
stock maps on microtech are just to ge the car started, you need to get the car tuned, usually when you have trouble starting the car when is cold it means that it needs more fuel on the crank maps, if you post on the microtech section maybe you get more help.
BLACK MAMBA is offline  
Old 02-11-11, 10:42 AM
  #5  
needs more track time
iTrader: (14)
 
gracer7-rx7's Avatar
 
Join Date: Mar 2006
Location: Bay Area CA
Posts: 7,837
Received 15 Likes on 14 Posts
I'm going to move this over to the Microtech section.
gracer7-rx7 is offline  
Old 02-12-11, 10:16 AM
  #6  
Engine, Not Motor
iTrader: (1)
 
Aaron Cake's Avatar
 
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,674
Likes: 0
Received 24 Likes on 23 Posts
You can only load a map saved on a dongle as the Microtech can't save to disk.

You can access these functions on screen 34.

Can't help on the base maps for the Supra. It just sounds like your car needs to be tuned.
Aaron Cake is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
eddierotary
Engine Management Forum
16
10-04-16 08:22 PM
frijol
Microtech
7
09-23-15 12:51 PM
freq
Haltech Forum
5
09-13-15 07:45 AM


Thread Tools
Search this Thread
Quick Reply: Microtech Microtech Help...


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
 
  • Ask a Question
    Get answers from community experts
Question Title:
Description:
Your question will be posted in: