Microtech matrix mode?
05-12-03, 02:51 PM
#3
Rotary Freak
Normal vs Matrix:
Normal gives you 4 fuel maps to modify:
Idle, LOAD, WOT, and Cruise.
Matrix Mode gives you:
AUX, 500,1000,1500,2000,2500,3000,3500,LOAD,4500,5000,5 500,6000,7000,8000,9000 and lockout from WOT and Cruise maps.
Normal gives you 4 fuel maps to modify:
Idle, LOAD, WOT, and Cruise.
Matrix Mode gives you:
AUX, 500,1000,1500,2000,2500,3000,3500,LOAD,4500,5000,5 500,6000,7000,8000,9000 and lockout from WOT and Cruise maps.
05-12-03, 02:56 PM
#4
Rotary Enthusiast
Join Date: Aug 2002
Location: Kansas
Posts: 1,273
Likes: 0
Received 0 Likes
on
0 Posts
mmmmmmm Matrix.... 2 days....
oh, back on the subject. 500 rpm difference, man that seems like plenty of resolution to do what you need to do. I suppose even finer would be better, but I can't imagine what I would do w/ any more than that...
oh, back on the subject. 500 rpm difference, man that seems like plenty of resolution to do what you need to do. I suppose even finer would be better, but I can't imagine what I would do w/ any more than that...
05-12-03, 03:00 PM
#5
Rotary Enthusiast
Join Date: Aug 2001
Location: Tallahassee, FL
Posts: 1,402
Likes: 0
Received 0 Likes
on
0 Posts
Matrix mode is simply what Microtech calls the 3D fuel map. It's as opposed to "normal" mode, which is the 2D-type fuel map used in the MT8/12 ECUs.
Brandon
BR7 Racing
Brandon
BR7 Racing
Thread
Thread Starter
Forum
Replies
Last Post
24seven_dada
3rd Generation Specific (1993-2002)
20
11-10-18 12:03 PM
befarrer
Adaptronic Engine Mgmt - AUS
3
09-22-15 09:33 AM
