Microtech LT8s problem :dunno:
04-19-11, 10:49 AM
#1
Full Member
Thread Starter
iTrader: (2)
Join Date: Jul 2008
Location: LI
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
LT8s problem :dunno:
So last night i finished the wiring in my 88 rx7 gxl and i didnt realize that i sent a 12v+ to the white wire (aux output) and the standalone never started... 
even when i send power straight to the brown and red wires... nothing. :/ can someone test it in the NY area?
even when i send power straight to the brown and red wires... nothing. :/ can someone test it in the NY area?
04-25-11, 03:59 AM
#2
What's that smell?
Join Date: Jul 2007
Location: Dorset, England
Posts: 217
Likes: 0
Received 0 Likes
on
0 Posts
You are grounding the brown cables yeah?
So permanent (fused to 15A) feed to red
Ground to Brown
Switched ignition feed to Pink
The white Aux is a ground trigger so you feed the other side of the Aux coil with a switched +12V feed.
So permanent (fused to 15A) feed to red
Ground to Brown
Switched ignition feed to Pink
The white Aux is a ground trigger so you feed the other side of the Aux coil with a switched +12V feed.
Thread
Thread Starter
Forum
Replies
Last Post
The1Sun
1st Generation Specific (1979-1985)
7
09-18-15 07:13 PM
