Microtech LT12 Starting Issue
Thread Starter
Full Member
Joined: Apr 2009
Posts: 60
Likes: 0
From: Oz
LT12 Starting Issue
I have got an LT12 with X6 hooked up to my 20B. It is all tuned and running fine, however I recently fixed a large vacuum leak and ever since then, the car is difficult to start.
If I crank it, it will kick over and the die immediately. I need to apply some throttle to get it to start but it is still difficult. The problem only occurs when the car is completely cold.
I have a USB dongle to adjust settings, but I am very new to the Microtech. What screen and setting should I be looking for?
If I crank it, it will kick over and the die immediately. I need to apply some throttle to get it to start but it is still difficult. The problem only occurs when the car is completely cold.
I have a USB dongle to adjust settings, but I am very new to the Microtech. What screen and setting should I be looking for?
Thread
Thread Starter
Forum
Replies
Last Post
1993fd3sracer1
1st Generation Specific (1979-1985)
20
Sep 7, 2015 11:50 AM
