Microtech Lt10s timing values ??
Thread Starter
Full Member
Joined: Feb 2006
Posts: 82
Likes: 11
From: CHICAGO
Lt10s timing values ??
Hello all,
looking for some help with my Lt10’s 4x. I had some issues with my tuner unable to set a steady timing value. He tried, the end result was not much. The issue was the timing not “locking”. My set up is a 93 Rx7 for street use, single, large street port, msd coils per plug.
I was told it is a problem with the ecu unit itself. Being the timing values not staying locked in. Any advice with this please.
thanks
looking for some help with my Lt10’s 4x. I had some issues with my tuner unable to set a steady timing value. He tried, the end result was not much. The issue was the timing not “locking”. My set up is a 93 Rx7 for street use, single, large street port, msd coils per plug.
I was told it is a problem with the ecu unit itself. Being the timing values not staying locked in. Any advice with this please.
thanks
The car never gets tuned with locked timing, that is for setting up the CAS on cars with adjustable sensors, like the FC. Not the procedure for an FD, since it is not adjustable. Obviously the timing needs to be verified, but no tuning is done with the timing locked.
Last edited by Banzai-Racing; Jun 3, 2018 at 09:44 AM.
Thread
Thread Starter
Forum
Replies
Last Post
pistonsuk
Haltech Forum
9
Feb 27, 2003 02:24 PM
4ohfour
1st Generation Specific (1979-1985)
7
Mar 12, 2002 02:45 PM
cewrx7r1
Power FC Forum
5
Dec 24, 2001 03:38 AM